Search found 58 matches

by takeuchi
Fri Jul 10, 2020 10:16 pm
Forum: Delica Parts for Sale (Non-Commercial)
Topic: Headlights and Tail Light Housings
Replies: 0
Views: 1158

Headlights and Tail Light Housings

I've got the following for a '92 Delica L300: 1 full set of headlights (three prong connector has been removed) 1 left headlight - see photo for connector (I might be able to get the right one back from someone) 1 set of front marker housings without the winged attachment (slightly scratched) 1 set ...
by takeuchi
Fri Jul 05, 2019 9:18 am
Forum: L300 Technical
Topic: Leaky Sunroof Seam
Replies: 1
Views: 762

Leaky Sunroof Seam

So I found the source of my wet carpets even after sealing behind the front corners and roof gutters. There is water leaking through the sunroof seam sort of near the front hinges. Doesn't look bad, but has anyone else had this problem or fixed this? Do I just try to remove the sealer, clean it out ...
by takeuchi
Thu May 02, 2019 5:58 pm
Forum: L300 Technical
Topic: Oil Pan/Sump Removal
Replies: 4
Views: 1277

Oil Pan/Sump Removal

Mechanic did it prior, so I'm not sure. It looks like the metal seal they gave back to me has black goop on it.
by takeuchi
Thu May 02, 2019 3:31 pm
Forum: L300 Technical
Topic: Radio Antenna
Replies: 0
Views: 842

Radio Antenna

In the process of getting rid of electrical gremlins when the dash was out, I removed an aftermarket antenna (for an aftermarket radio) and now have poor radio reception. Does the stock antenna have a wire running somewhere so I can use that one?
by takeuchi
Wed May 01, 2019 8:07 am
Forum: L300 Technical
Topic: Oil Pan/Sump Removal
Replies: 4
Views: 1277

Oil Pan/Sump Removal

Main leak was from the rocker cover (surprisingly since I had the metal half moon seal). They said also possible leaks from oil pan and the side oil pan near the injection pump. I think I'll try to clean it up to find the true source. Thanks Growler.
by takeuchi
Tue Apr 30, 2019 3:25 pm
Forum: L300 Technical
Topic: Oil Pan/Sump Removal
Replies: 4
Views: 1277

Oil Pan/Sump Removal

How hard is it to remove? I might have an oil leak there and mechanic said I would need a vehicle hoist to get some parts down.
by takeuchi
Tue Mar 26, 2019 12:31 pm
Forum: Delica Modifications
Topic: Custom L300 snorkel.
Replies: 43
Views: 29003

Custom L300 snorkel.

Ok, seems like I almost figured out how to retrieve the pictures from my phone. Sorry for the way too large size but can't spare time to fix it right now, sory. So here we go. Ouch.jpgBig hole.jpgInside out.jpgCanister removed.jpgPadded hole.jpgSealed up.jpgSealed off.jpg Any one know what kind of ...
by takeuchi
Fri Jun 08, 2018 6:28 pm
Forum: Delica Modifications
Topic: Intercooler, because why not.
Replies: 61
Views: 26733

Intercooler, because why not.

The thread referenced in that video shows doesn't have a chart for 1.5" pipe. The cross sectional area of a 1.5" pipe is 1.77 square inches, which at 300cfm (our engine's peak flow rate) is Mach 0.37- over the mach .35 recommended limit. I would stick to 2" as much as possible, with reducers/expand...
by takeuchi
Fri Jun 08, 2018 5:42 pm
Forum: Delica Modifications
Topic: Intercooler, because why not.
Replies: 61
Views: 26733

Intercooler, because why not.

I suppose the 1.5" piping will be fine after watching this:

https://www.dsmtuners.com/threads/how-t ... eo.515062/
by takeuchi
Fri Jun 08, 2018 4:03 pm
Forum: Delica Modifications
Topic: Intercooler, because why not.
Replies: 61
Views: 26733

Intercooler, because why not.

Hmm, the smallest a2w intercooler I can find with the ports on the same size is 2.5".

Would it be better to have 2.5" piping reduced at the turbo and at the inlet OR have 1.5" piping and expand and reduce right at the intercooler?
by takeuchi
Fri Jun 08, 2018 12:23 pm
Forum: Delica Modifications
Topic: Intercooler, because why not.
Replies: 61
Views: 26733

Intercooler, because why not.

Excellent, that helps! The turbo outlet/manifold inlet are 2inch? Time to order up the supplies!
by takeuchi
Tue Jun 05, 2018 7:57 am
Forum: Delica Modifications
Topic: Intercooler, because why not.
Replies: 61
Views: 26733

Intercooler, because why not.

Growler, If you were to install an a2w intercooler, where would you put one? Like this one: http://www.frozenboost.com/liquid-air-intercooler/water-to-air-intercooler-p-1034.html Would there be room right near the engine to spin the turbo a bit and have a short pipe to the intercooler and then anoth...
by takeuchi
Mon Jun 04, 2018 9:03 am
Forum: Delica Modifications
Topic: Galium modification,4d56+hp
Replies: 60
Views: 28008

Galium modification,4d56+hp

Sylquebec wrote:anyone else had a modified camshaft installed?

Envoyé de mon SM-G950W en utilisant Tapatalk
Yes, me.

http://www.delica.ca/forum/viewtopic.php?f=10&t=18832

If that link doesn't work it's the thread called TieMyShoes Grinded Cam

Sent from my ONEPLUS A5010 using Tapatalk

Admin: link fixed ;-)
by takeuchi
Tue Apr 24, 2018 11:45 am
Forum: L300 Technical
Topic: Spare Tire Lowering Bolt
Replies: 7
Views: 2698

Spare Tire Lowering Bolt

204explorer wrote:CCA has them for sale. Thought i let you know.

Sent from my SM-G950W using Tapatalk
I bought the hook but forgot to buy the bolt. Thought it would just be cheaper to pick one up at hardware store if someone knows the bolt size and thread pitch.

Sent from my ONEPLUS A5010 using Tapatalk
by takeuchi
Fri Apr 20, 2018 12:47 pm
Forum: L300 Technical
Topic: Spare Tire Lowering Bolt
Replies: 7
Views: 2698

Spare Tire Lowering Bolt

Anyone know the size of the bolt and the thread pitch?

Go to advanced search