Delica Canada | Mitsubishi Van Club

The new gears came in and the montero/D50 parts that I was able to get domestically are exactly the same! I started pressing new bearing on and when I had the main shaft apart The sleeve that the first gear needle bearings runs on was spinning on the main shaft. It looks like the roller bearing that...

I got it the rest of the gears out. it looks like it has 19 teeth on the input and 28 on the counter, though there is not much left to count on the input. I also noticed that the inner roller on the main shaft was not pressed all the way to the rest of the gear cluster. I don't know if it moved out ...

Your right, the bearing retainer for the main shaft has a counter bore cut in it that rest on the outer race and holds the bearing in place. Have any tips on getting that bearing off the main shaft? I cant get it to come out far enough to grab onto with a puller.

I finally got a little time to start on fixing my new Delica. I bought it with a bad transmission, it would only move in 4th gear, which made it a bit of a challenge driving it into the garage. I was pleased that the transmission came out fairly quickly and I only needed 12 and 14mm wrenches and soc...