Delica Canada | Mitsubishi Van Club

Hi My screen name is bartismo I have parted 4 of these and currently use 2 daily The timing belt can be done in the van not a big deal You will want to use a balance shaft elimination kit and don't forget to change the water pump and oil pump also a new tensioner for the timing belt .If You go elect...

I have an 1989 l300 with the 4 square headlights and I would like to switch to the later capsual type . Is this possiable and has anybody done it ? thanks for any help

There are different versions of the 4g64 a front wheel drive engine will not fit it is known as a narrow block approx 92 and after the engine used a 16 Valve single cam this engine will work with some mods but only out of a rear drive application

the jam front bumper will bolt right on to the us van after you cut off the impact bar I have a Jdm bumper on My van and I love it.

The wiper blade not sure as for the washer tank it comes out by pulling straight up.9

hi I am bartismo about Your air intake question the air path to the air cleaner is very restricted You can remove the plastic tube that plugs into the air cleaner housing and pickup a couple horsepower with no bad effects I also replaced the tube to the engine with a 2,25 inch exhaust pipe I also cu...

IHave a replacement 2.4 out of a 88 van ran when pulled $250 I live in grants pass 541-476-0245

I have parted out 4 of these so if You need someting just ask. I have a 1987 van/ wagon for sale 139K runs good blue with gray interior I live in southern Oregon right off I5 I am asking $2500.00 O.B.O 541-476-0245 ask for Doug

Try UHAUL in the us I was a dealer for them a while back and I have one of there hitches on My us van I thnk I paid less then a $100.00 for it. it used the shipping tabs uder the van to bolt to . I have a lot of us van parts if You guys need anything and my prices are a lot cheaper then the breakers...

I have two sets of sliding windows I would like to trade one set for a set of pop out windows the othe set I would like to trade for a set of wheel flairs white if possiable or a complete front bumper with turn lights all mounting hardware and brackets. The only catch is I live in sourthern Oregon. ...

I would like to know if axles from other mits 4x4 are interchangeable to the 1990 delica ? THANKS FOR YOUR HELP P.S I would like to stay with mits only as I live in southern Oregon U.S and would be converting a 2wd van wagon to 4x4 Delica