Delica Canada | Mitsubishi Van Club

Thanks guys, The wiring harness took me a while to wrap my head around it. I'd originally ordered the Eclipse engine harness from a wrecker in California, just to find out that I needed the engine bay harness as well. So I asked them to also pull the dash harness, as I really didn't know at that tim...

I blended bits of the Eclipse 3.8L to the Pajero/Montero 3.5/3.8L timing covers in order to seal up the timing cover area. Because of the shape of the cylinder head, and the Longitudinally mounted engine, the only covers that could have worked are from an '09-on Pajero 3.8L Mivec, which is a pretty ...

Cooling system mods: Coolant return line, bent, adjusted, twisted... whatever you wanna call it. This piece didn't bend and twist so easily, had to make a few attempts. So it turned out a bit ugly... The branch to the right is the return line from the rear passenger compartment heater. Something Ecl...

Could "Max 960px width" error message when submitting a post be modified a bit to include which image is causing the problem? I know other forums are capable. I also am having an issues with Photobucket delays to uploaded/editing images. Up to an hour delay sometimes. So the combination ca...

Here's a few pics of clearancing the Left cylinder head, to clear the firewall. (Front cylinder head on Eclipse) Because the block is approx 18mm taller than the original 3.0L 6G72, the small amount of clearance the original 3.0L had to the Delica firewall, means the 6G75M 3.8L cylinder head casting...

First few things on the block I had to modify or adjust. The Deli AC compressor mounting bracket required clearance, as did the Eclipse oil filter housing. http://i1262.photobucket.com/albums/ii606/Soulmonkey3/Mods%20and%20Brackets%20-%20Delica/P4220258b.jpg http://i1262.photobucket.com/albums/ii606...

Front end assembly: http://i1262.photobucket.com/albums/ii606/Soulmonkey3/Project%20Delica/DSC00158.jpg http://i1262.photobucket.com/albums/ii606/Soulmonkey3/Project%20Delica/DSC00160.jpg http://i1262.photobucket.com/albums/ii606/Soulmonkey3/Project%20Delica/DSC00162.jpg DC Sports CAI from a 4g Ecli...

Pics of the ECU tuning, mounting bracket, harness & Propane ECU: http://i1262.photobucket.com/albums/ii606/Soulmonkey3/Project%20Delica/DSC00119.jpg Tactrix OpenPort 2.0 cable and my bench re-flash harness http://i1262.photobucket.com/albums/ii606/Soulmonkey3/Project%20Delica/DSC00120.jpg Latest...

Near finished wiring harness... http://i1262.photobucket.com/albums/ii606/Soulmonkey3/Project%20Delica/DSC00101.jpg Bench Flashing My ECU with MMCflash (unsuccessful) http://i1262.photobucket.com/albums/ii606/Soulmonkey3/Project%20Delica/DSC00034.jpg Relocated PS reservoir (mounted to pump bracket) ...

Modified Remote Mivec oil valve assembly mounting bracket http://i1262.photobucket.com/albums/ii606/Soulmonkey3/Project%20Delica/DSC00010.jpg Remote Mounted http://i1262.photobucket.com/albums/ii606/Soulmonkey3/Project%20Delica/DSC00018.jpg http://i1262.photobucket.com/albums/ii606/Soulmonkey3/Proje...

Not in any sorta order, but here's your Morning Mitsu nasty! Random modifications that have been done to date. Mitsu Endeavor fuel rail with pressure regulator adapter. http://i1262.photobucket.com/albums/ii606/Soulmonkey3/Project%20Delica/DSC07115.jpg Modified Coolant Thermostat/Rad hose flange. ht...

2.0L Mini Kei would be pretty cool.
I have a lot of Delica road trips ahead of me, I'll probably be through Calgary occasionally.

I'll try to keep the pics coming. I've tried to document most of the project. I'll post more on the engine install as soon as I get a chance.

I've done many engine swaps on European imports but first shot at a Mitsubishi.

Mr. Flibble wrote:Would it fit in a Delica?

Only in a Long Wheel Base model...

patriceboivin wrote:Looks like you have a sci-fi rocket engine in your garage, behind the van.

Sort of... Its a Gas Turbine (Jet) engine being overhauled, its used in Sabre and CF-100's. 7300lb ft of thrust.
Old but solid engine.