Delica Canada | Mitsubishi Van Club

Nice! I've got a similar setup going on, although mine is mounted down low on the side of the steering column by my right knee.

Probably a silly question but are you pressing the button to disable overdrive while you're going up the coquihala? My overdrive override button was broken and I had similar speed, 80ish km/h max and struggling, because the van was trying to go up the hill in overdrive. Now that the button is fixed ...

There is also the Delitune tuneup offered by CVI. When my van first arrived it started poorly, was sluggish until it warmed up, and always had a fairly large hesitation while accelerating. The Delitune fixed all those issues. Mardy and those guys really know Delica's inside and out and they are very...

Sounds good, let's make it happen for tonight. Just PM'd you my cell number.

I'm looking for some rims. Would these fit an L400?

You guys rule, thanks for the detailed and precise how to. With pictures even. This is awesome, I am going to do this asap. No idea where to get the bulbs. Thanks for the photo of the bulbs. Very odd size and shape indeed. I was hoping to get a replacement at Canadian Tire but this looks like a more...

I need to replace the bulb in my heater control unit so I can see my controls at night. I have the manual kind, with cables (see pic below). Last night I took apart the dash, removed the stereo and glove box, etc, but couldn't pull out the heater control unit due to the cables in the rear. I couldn'...

It's pretty easy to pull off the gauge pod. First remove the back plastic - this just pops out of two clips, pull it at a 45 degree angle up (towards the windshield). The clips are on either side of the piece. Once that is off, you'll see two screws, one on either side. Unscrew those and the pod wil...

Looking good!

Sweet deli1733, any pics? Is your pyro round in shape?

My 95 L400 came from japan with an HKS boost gauge, mounted in a metal bracket and affixed to the dash with double sided tape. I love the gauge but not the ugly location, so I stuffed it into the center hole in the gauge pod. Luckily it fit perfectly in the hole. I was able to use the metal bracket ...