simple hitch update?

Mitsubishi Delica Camper vans, lift kits & other Delica Accessories!

Moderator: BCDelica

dpd
Posts: 119
Joined: Tue Sep 04, 2007 12:11 pm

Re: simple hitch update?

Post by dpd »

Thanks Sabbir, it's good to see that you're listening to customers and adjusting as required!
I should add to my post above, that I've had lots of help and courteous treatment from max overdrive.
User avatar
glenn
Posts: 661
Joined: Tue Jan 08, 2008 10:18 pm
Vehicle: 93 L300/97 L400 Jasper
Location: coquitlam
Location: coquitlam
Contact:

Re: simple hitch update?

Post by glenn »

Thanks for the responses to my hitch - I didn't mean to hijack this post.

Delicat - yes you're right, just a 1/4" or so had to be removed from the tabs where they butt against the torsion bar nuts. Fairly easily remedied, but I was expecting a straight bolt on hitch. And I will take your advice and upgrade the bolts - the tack welding seems like a great idea too.

And to Sabbir at max overdrive - thanks for the offer of the oil filters, I definitely appreciate the gesture. My comments weren't meant to be a complaint, more of an anecdote. If I wasn't happy with the hitch, I would definitely have contacted you. In fact, you'll probably see me again the next time I need parts.

Glenn
Glenn
http://www.vurv.ca

L400 and L300 consoles
Image
User avatar
mdrive
Posts: 528
Joined: Tue Nov 07, 2006 3:09 am
Member's Photo Album: http://www.delica.ca/Photos/
Location: Richmond, BC
Contact:

Re: simple hitch update?

Post by mdrive »

Thank you all.
Image
MAXIMUM OVERDRIVE AUTO IMPORTERS
4-7900 RIVER ROAD, RICHMOND, BC V6X1X7
TEL: 604-726-3109 Email: Sales@maxoverdrive.ca
For Vehicles visit: http://WWW.MAXOVERDRIVE.CA
For Online Parts Store, visit:http://www.maxoverdrive.ca/parts/.
User avatar
delicat
Posts: 2331
Joined: Thu Jul 26, 2007 6:26 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: '92 Exeed '93 Safari '94 Pajero
Location: New Westminster, BC
Location: New Westminster, BC

Re: simple hitch update?

Post by delicat »

One more thing on this hitch.

Although I replace all the bolts with hi-strength ones and torqued the hell out of those the hitch moves down when loaded. I bought a hitch carrier at Princess Auto, they are rated for 500lbs. (Same set up as Schawz on his avatar)

When I load it with a few cubes of oil the carrier drops down close to 6" at the back (loaded with 250lbs). It's because the hitch is made of 2 parts and there's play in it, no matter how much torque you apply. I'll have to grind the paint off and weld it in place so it doesn't drop down.

I guess these are the issues one has to deal with...

David
'93 Nissan Patrol
'94 Mitsubishi Pajero
Image

"If it ain't broken, modify it!"
toddtomorrow
Posts: 55
Joined: Sun Apr 01, 2007 1:01 pm

Re: simple hitch update?

Post by toddtomorrow »

Is this E&H a local company in the Vancouver area? Is there any contact information for them? I'm ready to buy one.

Todd
sid
Posts: 115
Joined: Thu Feb 15, 2007 5:39 pm
Vehicle: 1993 super exceed
Location: north van

Re: simple hitch update?

Post by sid »

on Beresford in burnaby.

sid
User avatar
cramstar74
Posts: 6
Joined: Fri Aug 22, 2008 7:00 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Pajero 92 exceed lwb
Location: canmore ab

Re: simple hitch update?

Post by cramstar74 »

does anyone know of a solid receiver that bolts on to a 92 pajero/montero. it has a factory toe-hook with a simple four bolt patern, i would like to use this location for a ball (clearance). any info would be greatly apreciated.
fexlboi
Posts: 1671
Joined: Thu Jun 19, 2008 11:28 pm
Member's Photo Album: http://dinoevo.de
Vehicle: -
Location: -
Contact:

Re: simple hitch update?

Post by fexlboi »

glenn wrote:I just finished installing one of the maximum overdrive hitches for $380. It's pretty much as described earlier, plus it comes with a receiver and ball. It's very easy to install, bolts right on around the spare. Bolts both to the bumper and to the frame. There are flanges that have to be removed before it will fit properly. I was told they were going to be removed, then after waiting 20 mins was given a hitch - only to discover it wasn't done once I got it home?

at any rate, this hitch will serve me well, and if you don't mind being treated with indifference when you buy it, it's not a bad option.
Off topic: I saw it already on a few Delicas. Some of them had it on the roof. What is that in the red circle?
Attachments
what_is_that.jpg
what_is_that.jpg (70.29 KiB) Viewed 7260 times
quadzilla
Posts: 236
Joined: Tue Dec 18, 2007 8:18 pm
Vehicle: 1992 Exceed

Re: simple hitch update?

Post by quadzilla »

It is probably the TV antennae - I had one on either side of my van when i got it - got rid of them when I got rid of the Japanese stereo and TV. :-D
User avatar
mararmeisto
Posts: 3276
Joined: Wed Sep 19, 2007 10:00 am
Vehicle: 2018 Ram EcoDiesel
Location: Dartmouth, NS

Re: simple hitch update?

Post by mararmeisto »

fexlboi wrote:
glenn wrote:I just finished installing one of the maximum overdrive hitches for $380. It's pretty much as described earlier, plus it comes with a receiver and ball. It's very easy to install, bolts right on around the spare. Bolts both to the bumper and to the frame. There are flanges that have to be removed before it will fit properly. I was told they were going to be removed, then after waiting 20 mins was given a hitch - only to discover it wasn't done once I got it home?

at any rate, this hitch will serve me well, and if you don't mind being treated with indifference when you buy it, it's not a bad option.
Off topic: I saw it already on a few Delicas. Some of them had it on the roof. What is that in the red circle?
Yes, TV antennae.
JPL
I still miss my '94 Pajero!
User avatar
glenn
Posts: 661
Joined: Tue Jan 08, 2008 10:18 pm
Vehicle: 93 L300/97 L400 Jasper
Location: coquitlam
Location: coquitlam
Contact:

Re: simple hitch update?

Post by glenn »

Yes, those are tv antennae. Like quadzilla, my van came with a useless-to-me Japanese stereo and tv with a Japanese cd rom based map system. State of the art in 1993 I'm sure. I haven't gotten around to taking them off yet.
Glenn
http://www.vurv.ca

L400 and L300 consoles
Image
Glenn Delwood
Posts: 114
Joined: Thu Aug 16, 2012 10:15 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1995 Royal Exceed
Location: Coquitlam, BC

Re: simple hitch update?

Post by Glenn Delwood »

I'm looking for an LWB L400 hitch. (I understand that Maximum's for $380 is SWB only.) Also, can I keep the shinny bumper? (On the van, that is... :-) )
Image
User avatar
nxski
Posts: 3268
Joined: Tue Aug 31, 2010 6:27 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1991 Delica L300 Super Exceed
Location: Coquitlam
Location: BC, Canada
Contact:

Re: simple hitch update?

Post by nxski »

Glenn Delwood wrote:I'm looking for an LWB L400 hitch. (I understand that Maximum's for $380 is SWB only.) Also, can I keep the shinny bumper? (On the van, that is... :-) )
Try E&H Hitch. They work on tons of Delica's. No, you won't be able to keep your shiny bumper on wit the hitch (E&H has a huge pile of them).
Live the life you love, love the life you live...

Had: 1991 Mitsubishi Delica L300 SuperExceed, heavily modified (totalled by a drunk driver)
Have: 2011 Acura CSX manual, lightly modified
Want: Mitsubishi Pajero Evo

http://nes-design-construction.com
http://ca.linkedin.com/pub/nicolas-spurling/46/b48/924

Nicola Spurling
User avatar
mararmeisto
Posts: 3276
Joined: Wed Sep 19, 2007 10:00 am
Vehicle: 2018 Ram EcoDiesel
Location: Dartmouth, NS

Re: simple hitch update?

Post by mararmeisto »

Wicked old thread - R E V I V E D !
JPL
I still miss my '94 Pajero!
User avatar
glenn
Posts: 661
Joined: Tue Jan 08, 2008 10:18 pm
Vehicle: 93 L300/97 L400 Jasper
Location: coquitlam
Location: coquitlam
Contact:

Re: simple hitch update?

Post by glenn »

Mararmeisto - you said what I was just thinking. Man, my L300 was nice back then.
Glenn
http://www.vurv.ca

L400 and L300 consoles
Image
Post Reply

Return to “Delica Modifications”