Could someone who has a ladder, Terzo or otherwise, measure the total width of the ladder. I'm getting one made and can't seem to find what a typical width is. Mine is going to be on the side rather than the back. Looking at about 15 inches ( 13 inch step) but wondering if that's a bit wide.
Thanks for any input.
Ladder Dimensions
Moderator: BCDelica
-
- Posts: 5
- Joined: Sun Aug 30, 2015 7:32 am
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: L400 Delica
- Location: Metchosin BC
-
- Posts: 138
- Joined: Tue Apr 30, 2013 4:15 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1997 L400 Super Exceed PE8W
- Location: Delta B.C.
Re: Ladder Dimensions
Hi Forestt, I have a Terzo ladder on mine. It measures 13 3/4" wide.
Hope that helps
Hope that helps
-
- Posts: 5
- Joined: Sun Aug 30, 2015 7:32 am
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: L400 Delica
- Location: Metchosin BC
Re: Ladder Dimensions
Thanks,
I'll post pics once I get it built.
I'll post pics once I get it built.
-
- Posts: 138
- Joined: Tue Apr 30, 2013 4:15 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1997 L400 Super Exceed PE8W
- Location: Delta B.C.
Re: Ladder Dimensions
I should have clarified. That's an outside measurement. From outside to outside of the vertical bar.