Plantdrive SVO Schematics?

dreamer · Post by **dreamer** » Fri Jun 28, 2013 11:18 pm

Greetings everyone,
Kudos to this site for being available to the masses, it is much appreciated. Does anyone know where I can find schematics for installing the Plantdrive SVO system? I've got everything I need, would feel a lot more comfortable seeing schematics. Much appreciated, thanks!
Ryan

Torqueluvr · Post by **Torqueluvr** » Wed Jul 03, 2013 1:17 pm

I would like to bump this post up. Just acquired a never used kit myself, and a schematic or blue print would work wonders.

Glenn Delwood · Post by **Glenn Delwood** » Wed Jul 03, 2013 2:47 pm

+1
Are you guys talking about the Vegtherm system?

delicat · Post by **delicat** » Thu Jul 04, 2013 11:33 am

Here's how I set up my valves. Obviously, the default valves position is not powered while on diesel (so if you loose power to them you're not stucked on wvo). If you plan on using an inline fuel pump I'd move the Wvo return line between the supply valve and the IP so that left over oil blends in with the fresh diesel... If no inline pump than it would simply findings way back into the Wvo tank as drawn.

[img]http://img.tapatalk.com/d/13/07/05/vyte5usa.jpg[/img]

Is this what you were looking for?

Cheers
Mr. D

dreamer · Post by **dreamer** » Wed Oct 23, 2013 10:50 am

Thanks Mr. D, that should help some. That being said, anything else out there would be of help as well!

...and to Glenn, ues, the Vegtherm is the one I'm talking about. It comes with instructions from the fellow out of (Salmon Arm?) but a diagram of sorts would be superb.

Thanks!

Delica Canada | Mitsubishi Van Club