How much torque can Ericsson 30-43le withstand 400nm? 300nm?

Does your Mitsubishi L300 make a strange noise? Need wheel alignment specs?
Post Reply
NCC1701
Posts: 2
Joined: Tue Jun 16, 2020 3:20 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: xml6125hev93c
Location: uss

How much torque can Ericsson 30-43le withstand 400nm? 300nm?

Post by NCC1701 »

I tried to install a (4d56) and its drive system Aisin 30-43le on a Ford T350. I don't know if it can bear enough torque.



Is your l300 using Aisin 30-43? How much torque can Ericsson 30-43le withstand 400nm? 300nm?

My rear differential speed ratio is 3.73
User avatar
Growlerbearnz
Posts: 2041
Joined: Sat Jun 26, 2010 1:58 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Delica P25W
Location: New Zealand

How much torque can Ericsson 30-43le withstand 400nm? 300nm?

Post by Growlerbearnz »

Autocorrect?

L300s (the boxy shaped Delicas, from 1988 to 1996) use an Aisin 03-72L. If you've got an LE it's from something else.

The 03-72L was also known as the Toyota A44DL. It was only fitted to vehicles with torque output up to 200Nm (Montero 4D56 Turbo, Volvo 940 GLE 16-valve).

The 03-71 (Toyota A43D) is the same shape and should fit to a 4D56, it's a non-lockup transmission and was fitted to the Volvo 940 2.3 Turbo making 265Nm.

I can't find any instance of an Aisin 03-7X transmission being used on anything with more than 300Nm.
Nothing says "poor workmanship" more than wrinkles in the duct tape.
NCC1701
Posts: 2
Joined: Tue Jun 16, 2020 3:20 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: xml6125hev93c
Location: uss

How much torque can Ericsson 30-43le withstand 400nm? 300nm?

Post by NCC1701 »

I change my transmisson .For TRANSIT T350 VAN, it have 3000kg
IF 4d56 get 100kw 300nm + 30-43LE can work?

Is there any way to increase the power without increasing the torque and reach 90 or even 100kW at the limited speed of 4d56 of 2000 +? Can my 30-43le transmission cooperate actively

:-D :-D :-D :M
User avatar
Growlerbearnz
Posts: 2041
Joined: Sat Jun 26, 2010 1:58 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Delica P25W
Location: New Zealand

How much torque can Ericsson 30-43le withstand 400nm? 300nm?

Post by Growlerbearnz »

I don't know the 30-43LE transmission, I only know Delica transmissions, sorry.
Nothing says "poor workmanship" more than wrinkles in the duct tape.
Post Reply

Return to “L300 Technical”