Penticton

New to Delica Canada? Please introduce yourself and your van!
Post Reply
twnavin
Posts: 5
Joined: Fri Jan 04, 2008 9:44 pm
Vehicle: 92 delica exceed

Penticton

Post by twnavin »

Hey, I'm new to the Delica crew. So, hi every one.
Does anyone use a mechanic in this area? Not that I need one but one around Penticton for the contact list. I've used Dean@japanoid and he was great. But that's
400km from here.
jskrepnek
Posts: 70
Joined: Tue Aug 21, 2007 5:54 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 92 Delica Exceed
Location: Chilliwack
Location: Chilliwack

Re: Penticton

Post by jskrepnek »

Hi,

This question keeps getting asked, but there doesn't seem to be an answer - yet. There's been a Delica near Keremeos for a couple years now - the owners have used a local (to Keremeos) garage for work. But with all the Delicas popping up in the area, it's only a matter of time before there will be a go-to garage in Penticton. Let us all know if you find one ...

-- Joel
User avatar
mararmeisto
Posts: 3276
Joined: Wed Sep 19, 2007 10:00 am
Vehicle: 2018 Ram EcoDiesel
Location: Dartmouth, NS

Re: Penticton

Post by mararmeisto »

Welcome to the club. Penticton? Wow, these things keep popping up further and further inland. That is so cool!

Enjoy your new ride.
JPL
I still miss my '94 Pajero!
User avatar
MardyDelica
Posts: 2190
Joined: Sun Jan 14, 2007 3:32 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: DL#30843 /92 Delica Super Exceed
Location: Richmond B.C.
Contact:

Re: Penticton

Post by MardyDelica »

usually, when you do all the service for delica specially timing belt , water pump, adjust valve , tensioner , seals & other thing you will be good for another 80-90 kms before you change the timing belt again.
its not acctually hard if you do this but if not very hard , few mechanic dont like to work on this,
but if you need help spend time bring the van to richmond area, & will look after your van, no problem, i have mechanic & parts to fix your delica, no problem,
enjoy;
Cheers:
ImageImageImage
Post Reply

Return to “Member Introductions”