Mounting a center cup holder from a Honda Odyssey or CRV

CREGAN · Post by **CREGAN** » Tue Aug 20, 2013 9:24 pm

Has anyone ever heard of this mod and considered it? I have just been reading about it on the Samba and people are doing it in their VW's. Think it would apply to L400's. Check it out:

: 5133501.jpg (42.17 KiB) Viewed 5555 times

: 5133503.jpg (33.99 KiB) Viewed 5555 times

: 5133504.jpg (28.48 KiB) Viewed 5558 times

: 5133505.jpg (24.58 KiB) Viewed 5555 times

: 5133506.jpg (25.94 KiB) Viewed 5558 times

I am considering it. I am thinking about starting the search for the cup holder at the wreckers. I actually tried to get one from the states but it would have came to over $100. Me thinks the wrecker will be cheaper.

Craig

Mr. Flibble · Post by **Mr. Flibble** » Wed Aug 21, 2013 11:31 am

I just got a big floor box from Cambodian Tire. Works great.

CREGAN · Post by **CREGAN** » Wed Aug 21, 2013 12:09 pm

Mr. Flibble wrote:I just got a big floor box from Cambodian Tire. Works great.

I have one of those too in my westy, but it eliminates the walk through. Handy when you have two carseats to get to. I just like how this folds up and can possibly hold more than a small slurpee.

Craig

Firesong · Post by **Firesong** » Wed Aug 21, 2013 3:52 pm

I like it. What's the cost at the wreckers?

CREGAN · Post by **CREGAN** » Wed Aug 21, 2013 5:31 pm

Still searching wreckers around here. Flee bay has a cost of about $50 but the shipping is killer. Shouldn't be that expensive. If it doesn't work out- ah well, I have thrown money away in much worse places!

Craig

Mr. Flibble · Post by **Mr. Flibble** » Wed Aug 21, 2013 7:05 pm

CREGAN wrote:Still searching wreckers around here. Flee bay has a cost of about $50 but the shipping is killer. Shouldn't be that expensive. If it doesn't work out- ah well, I have thrown money away in much worse places!

Craig

If you ever need stuff shipped to a US address, I can help out. Though, you still have to drop by to get the part!

CREGAN · Post by **CREGAN** » Wed Aug 21, 2013 8:42 pm

Mr. Flibble wrote:
CREGAN wrote:Still searching wreckers around here. Flee bay has a cost of about $50 but the shipping is killer. Shouldn't be that expensive. If it doesn't work out- ah well, I have thrown money away in much worse places!

Craig
If you ever need stuff shipped to a US address, I can help out. Though, you still have to drop by to get the part!

Ah man do I wish I lived closer to all you Vancouver/Van. Island/Washington-ers. Life would definitely be better for a Delica addict such as myself.

Craig

fredt · Post by **fredt** » Sat Sep 07, 2013 10:21 am

here's a honda crv tray in my l400

http://i668.photobucket.com/albums/vv50 ... 243246.jpg

http://i668.photobucket.com/albums/vv50 ... 75ccd5.jpg

Post by **nxski** » Sat Sep 07, 2013 1:33 pm

Wow, it looks like it was made for the L400!

fredt · Post by **fredt** » Sat Sep 07, 2013 2:28 pm

full post on how I did it....

http://www.delicaclub.com/viewtopic.php?t=34923

the original idea was posted on the uk site by a fellow member, he bolted his to the floor, I figured that if i slid the seat forward the tray would move too and not cause an obstruction
I like the cut out in it so you still grab the shift lever with it folded up

CREGAN · Post by **CREGAN** » Sat Sep 07, 2013 6:56 pm

I LIKE IT! Nice work. Does your passenger find it a bit intrusive attached that far forward on the seat? Looks great- now I am going to amp up my efforts for a winter project (because I just don't have enough of those.

)

Craig

fredt · Post by **fredt** » Mon Sep 09, 2013 1:19 pm

no complaints so far! being that far forward means you dont have to look behind you to search for the cup holders :)
it gets used more that the oe cup holders ever have!
I flip it up and drop my phone and wallet on it every time I used the truck now, which is good as I'm looking at a double din unit, which will mean the loss of the storage slot under the radio

Delica Canada | Mitsubishi Van Club