6-pin connector for fog light button

Mitsubishi Delica L400 production commenced in 1994 -- After much anticipation, the L400 arrived on Canadian Soil in 2009!
Post Reply
User avatar
patriceboivin
Posts: 226
Joined: Fri Jan 03, 2014 1:45 pm
Member's Photo Album: http://www.delica.ca/Photos/index.php?cat=23122
Vehicle: Mitsubishi Delica L400 Super Exceed
Location: Canada
Location: Dartmouth, NS

6-pin connector for fog light button

Post by patriceboivin »

I tested my PIAA H4 fog lights yesterday with the PIAA harness, they do work.
Not as bright as the head lights but I think Mardy may have put LEDs in my headlights... The head lights i have now light up signs further away than I've ever seen before.

However it would be nice if I could use the Mitsubishi Delica button for fog lights instead of the little gizmo which came with the PIAA harness.

Went to NAPA Auto Parts at lunch, asked them if the knew where I might find a female 6-pin connector to fit the button.
I showed them the button.
The clerk had no idea. :shock:

Here I though NAPA Auto Parts sold... auto parts. :?

I guess I'll have to buy one from MitzyBitz or some other place.

If NAPA doesn't know about fog light button connectors I suspect all their competitors have no idea either.
Top
alti2d
Posts: 145
Joined: Tue Oct 26, 2010 6:13 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1992 Delica L300
Location: Fort McMurray

Re: 6-pin connector for fog light button

Post by alti2d »

For hard to find Japanese electrical connectors try http://www.easternbeaver.com

Had great luck with them. Or just cut off the original ones and use some 6 plug after market.
Image
Top
Post Reply

Return to “L400 Technical”