Leaking reactor core.

Topics may eventually be moved to other Delica Canada forums.

Moderators: BCDelica, mark

Post Reply
User avatar
Growlerbearnz
Posts: 2041
Joined: Sat Jun 26, 2010 1:58 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Delica P25W
Location: New Zealand

Leaking reactor core.

Post by Growlerbearnz »

It appears my Delica's reactor core has sprung a leak. Has anyone experienced this before? Where should I be looking for a leak? And does anyone know where I can find replacement dilithium crystals to top it up?
ReactorCore.JPG
ReactorCore.JPG (82.99 KiB) Viewed 2834 times
Nothing says "poor workmanship" more than wrinkles in the duct tape.
User avatar
Lapprentis
Posts: 357
Joined: Sat Dec 28, 2013 6:02 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Delica L300 StarWagon 1990
Location: Quebec

Re: Leaking reactor core.

Post by Lapprentis »

Just trade some with Quark or any other Ferengi :shock:

Seriously: you just disclore the origin of all those crop circles :shock:

Lapprentis :M
User avatar
FalcoColumbarius
Site Admin
Posts: 5983
Joined: Tue Jan 22, 2008 1:55 pm
Member's Photo Album: http://www.delica.ca/Photos/index.php?cat=11103
Vehicle: Delica; Chamonix GLX ('92 P25W)
Location: North Van, BC, eh?

Re: Leaking reactor core.

Post by FalcoColumbarius »

My flux capacitor has been fluxing a little too much of late. I think it's time I pulled out the saddle and investigated the FC mountings. It's weird, lately I've occasionally found myself driving down the street in 1976 and everyone is standing drop-jaw on the pavement staring at me as I cruise by. At first I thought I was maybe having a flash back or something but then I discovered this picture in an old book on the late nineteenth century gold rush in northern British Columbia:

Image

This can be a little disconcerting, as I'm sure you are well aware. I think the mountings are loose and it's causing a vibration in the flux vortex. strangely I always seem to find my way back to now, here... :?

I love the crop circle, you should do more of those. :wink:

Falco.
Sent from my smart pad, using a pen.

Seek Beauty... Image Good Ship Miss Lil' Bitchi

...... Vision without action is a daydream. Action without vision is a nightmare. ~ Japanese Proverb
User avatar
Growlerbearnz
Posts: 2041
Joined: Sat Jun 26, 2010 1:58 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Delica P25W
Location: New Zealand

Re: Leaking reactor core.

Post by Growlerbearnz »

FalcoColumbarius wrote:Lately I've occasionally found myself driving down the street in 1976 and everyone is standing drop-jaw on the pavement staring at me as I cruise by.
My grandad said that happened to him, and then he went to live in a nursing home. I suggest wearing pants in future. Or the past.

But for serious: get those mountings looked at ASAP. If they shear you can fall into a time vortex, and then the only way to get back involves accelerating to 88mph while generating 1.21GW. Good luck with the 88mph!
Nothing says "poor workmanship" more than wrinkles in the duct tape.
User avatar
FalcoColumbarius
Site Admin
Posts: 5983
Joined: Tue Jan 22, 2008 1:55 pm
Member's Photo Album: http://www.delica.ca/Photos/index.php?cat=11103
Vehicle: Delica; Chamonix GLX ('92 P25W)
Location: North Van, BC, eh?

Re: Leaking reactor core.

Post by FalcoColumbarius »



Falco.
Sent from my smart pad, using a pen.

Seek Beauty... Image Good Ship Miss Lil' Bitchi

...... Vision without action is a daydream. Action without vision is a nightmare. ~ Japanese Proverb
Post Reply

Return to “General Discussion”