cubie capacity
Moderator: BCDelica
-
loki
- Posts: 1428
- Joined: Sun Dec 16, 2007 12:18 am
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1994 Delica Royal Exceed
- Location: Victoria, BC
cubie capacity
has anyone measured out how most a cubie holds when filled right to the top? I know the say 17L on them but I don't think they are full to the top when new. I remember someone saying it was more like 20L so I was wondering if anyone had measured it out? if not I will try and remember to do it this weekend. would be nice to have a more accurate estimate of how much oil you have when loading up for a longer trip.
-
fishslapper
- Posts: 356
- Joined: Wed Oct 10, 2007 12:48 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1994 lwb l400
- Location: ottawa ontario
- Location: ottawa ont
Re: cubie capacity
slightly less than 20L if filled to just below the cap. I believe delicat has done a more accurate measurement but this is very close.
Hope this helps...
did you ever post up pics of your single tank install.......i am still waiting.
cheers
Hope this helps...
did you ever post up pics of your single tank install.......i am still waiting.
cheers
The Mighty Boosh !!
-
after oil
- Posts: 1436
- Joined: Mon Feb 11, 2008 7:01 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 92 cham-reimo poptop L300. 78MB240D
- Location: on the road
- Location: occupied coast salish territory aka powell river
Re: cubie capacity
x2
20 liters is about right
20 liters is about right
-
loki
- Posts: 1428
- Joined: Sun Dec 16, 2007 12:18 am
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1994 Delica Royal Exceed
- Location: Victoria, BC
Re: cubie capacity
fishslapper wrote:slightly less than 20L if filled to just below the cap. I believe delicat has done a more accurate measurement but this is very close.
Hope this helps...
did you ever post up pics of your single tank install.......i am still waiting.
cheers
cool thanks guys, I will be finishing the last part of the install this weekend. I love the kit but as is well know and pantdrive will love to point out :P the instructions are not stellar, they are very general (more like advice) and some times it's painfully obvious that it has been translated and likely not by a professional. My Wife speaks fluent German (German tourists often ask where in Germany she is from) but can't be of much help as see knows less about cars than I know about German so therefore doesn't know the terminology in either language. That said their support has been very good, and have answered all my emails in a timely fashion with very helpful info. this weekend I will be installing the aux fuel pump along with a shortcut and a non return valve on the IP out and it is done.
as for the pictures, I will do my best, I had grand plans of taking pictures all the way through and ended up not taking one, but I will take a bunch after it is finished and edit them to point out the things done to the best of my abilities, then I will be posting them and sending them to Elsbett as well :)