then it is pumped into the settling tanks, then into the gravity feed tank.
it feeds the centrifuge and then polishing 10 micron filter, into the final tote.
inside the raw power centrifuge
After Oil's Raw Power Centrifuge Setup
Moderator: BCDelica
-
after oil
- Posts: 1436
- Joined: Mon Feb 11, 2008 7:01 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 92 cham-reimo poptop L300. 78MB240D
- Location: on the road
- Location: occupied coast salish territory aka powell river
After Oil's Raw Power Centrifuge Setup
first i pour from the cubies through a 600 micron screen
then it is pumped into the settling tanks, then into the gravity feed tank.
it feeds the centrifuge and then polishing 10 micron filter, into the final tote.
inside the raw power centrifuge
then it is pumped into the settling tanks, then into the gravity feed tank.
it feeds the centrifuge and then polishing 10 micron filter, into the final tote.
inside the raw power centrifuge
-
after oil
- Posts: 1436
- Joined: Mon Feb 11, 2008 7:01 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 92 cham-reimo poptop L300. 78MB240D
- Location: on the road
- Location: occupied coast salish territory aka powell river
Re: After Oil's Raw Power Centrifuge Setup
f$uck seems like my photos are all gone