Procedure for replacing low beam bulbs ....

Mitsubishi Delica L400 production commenced in 1994 -- After much anticipation, the L400 arrived on Canadian Soil in 2009!
Post Reply
User avatar
Aciled
Posts: 152
Joined: Thu Sep 02, 2010 5:48 pm
Vehicle: 94 L400 SE SWB
Location: B.C.
Location: Coquitlam

Procedure for replacing low beam bulbs ....

Post by Aciled »

I'm wanting to upgrade my low beam H4's. Wondering about the procedure in what order to remove items (driver's side dual battery area)

Thanks in advance,

EN :-D :M
User avatar
jessef
Posts: 6459
Joined: Tue Feb 26, 2008 1:27 pm
Vehicle: JDM flavour of the month
Location: Vancouver
Location: Vancouver, BC

Re: Procedure for replacing low beam bulbs ....

Post by jessef »

reach down and pull out the plug.
unscrew the rubber/plastic cap and there's a metal pin holding the bulb in. press down and pop out.

if you can't reach in there (small hands help), then you may need to pull the batteries to get in there.

to pull the batteries you'll need to pull the intercooler off. 10mm bolts.
User avatar
Aciled
Posts: 152
Joined: Thu Sep 02, 2010 5:48 pm
Vehicle: 94 L400 SE SWB
Location: B.C.
Location: Coquitlam

Re: Procedure for replacing low beam bulbs ....

Post by Aciled »

jfarsang wrote:reach down and pull out the plug.
unscrew the rubber/plastic cap and there's a metal pin holding the bulb in. press down and pop out.

if you can't reach in there (small hands help), then you may need to pull the batteries to get in there.

to pull the batteries you'll need to pull the intercooler off. 10mm bolts.
Thanks!
Post Reply

Return to “L400 Technical”