trim removal

Mitsubishi Delica L400 production commenced in 1994 -- After much anticipation, the L400 arrived on Canadian Soil in 2009!
Post Reply
trecar
Posts: 53
Joined: Fri Sep 03, 2010 9:42 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 96 Delica Exceed
Location: Cochrane, AB
Location: Cochrane Alberta

trim removal

Post by trecar »

How easy is it to removal the trim of the door and rear to get at the speakers. Last thing i want to do is to break or ruin the retaining clip cause i imagine they are next to impossible to find.

Trevor
User avatar
Profister
Posts: 963
Joined: Fri Feb 08, 2008 3:41 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1999 PE8W Chamonix, EFI
Location: North Vancouver, BC

Re: trim removal

Post by Profister »

This will give you an idea how to remove the door panels:
http://imageevent.com/russpix/photos/ce ... conversion
I did it for the door lock actuator installation while installing the alarm and it was an easy job.
This will help you to work on rear speakers:
http://photos.imageevent.com/russpix/md ... ement1.pdf
Image
trecar
Posts: 53
Joined: Fri Sep 03, 2010 9:42 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 96 Delica Exceed
Location: Cochrane, AB
Location: Cochrane Alberta

Re: trim removal

Post by trecar »

thx very much will help immensely.
Post Reply

Return to “L400 Technical”