License plate
-
Marshal
- Posts: 15
- Joined: Sun Aug 21, 2011 8:41 am
- Vehicle: 1993 L300 Exceed
- Location: Calgary
- Location: Calgary, Alberta
- Contact:
License plate
Does anyone know if it is legal to drill a hole in a license plate in Alberta?
-
CREGAN
- Posts: 1094
- Joined: Thu Sep 24, 2009 8:05 am
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 94 L400 SpaceGear Super Exceed
- Location: Leduc, Alberta
Re: License plate
I did. Haven't gotten in trouble for it. I think it is OK as long as you don't drill through the stickers.
Craig
Craig
-
92pajero
- Posts: 100
- Joined: Thu Oct 14, 2010 9:55 am
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 92 pajero exceed
- Location: edmonton ab
Re: License plate
I had to, in order to mount my plate on my pajero. No issues as of yet, just do not deface the alpha numerics nor the stickers
"Why are some peoples mouths in overdrive but their minds are in neutral"
-
Marshal
- Posts: 15
- Joined: Sun Aug 21, 2011 8:41 am
- Vehicle: 1993 L300 Exceed
- Location: Calgary
- Location: Calgary, Alberta
- Contact:
Re: License plate
Thanks for the input guys. It certainly is the simplest solution. Picked up a couple of 6mm bolts at bolt supply and I'm off to drill a hole.
-
FalcoColumbarius
- Site Admin
- Posts: 5983
- Joined: Tue Jan 22, 2008 1:55 pm
- Member's Photo Album: http://www.delica.ca/Photos/index.php?cat=11103
- Vehicle: Delica; Chamonix GLX ('92 P25W)
- Location: North Van, BC, eh?
Re: License plate
I went to Rona. It looks better to have the plates properly secured rather than hanging off one screw.
Falco.
Falco.
Sent from my smart pad, using a pen.
Seek Beauty...
Good Ship Miss Lil' Bitchi
...... Vision without action is a daydream. Action without vision is a nightmare. ~ Japanese Proverb
Seek Beauty...
Good Ship Miss Lil' Bitchi...... Vision without action is a daydream. Action without vision is a nightmare. ~ Japanese Proverb
-
jessef
- Posts: 6459
- Joined: Tue Feb 26, 2008 1:27 pm
- Vehicle: JDM flavour of the month
- Location: Vancouver
- Location: Vancouver, BC
Re: License plate
Not sure there but here in BC you 'can' be scuffed at for doing any modifications to it including drilling additional holes as it is technically ICBC's property.
With that said, I have never heard, read or seen from the VPD/RCMP side of any infractions regarding alternate mounting holes so long as it does not impede or alter the #/A's and date/emblem.
With that said, I have never heard, read or seen from the VPD/RCMP side of any infractions regarding alternate mounting holes so long as it does not impede or alter the #/A's and date/emblem.