Passenger seat base mount point measurements

[jessef]

I took a rough measurement based on the existing swivel base I have installed in our L400 but require confirmation.

I would appreciate the measurements of the stock seat setup as per below from one of you guys when you have some time and a tape measure. The more accurate, the better.

inches/mm either or.

L400 passenger seat base/floor mount

Base - mounts to floor:
Front width - 11" wide
Rear width - 13.75" wide
Front to Rear length - 14.5" long

Upper sliding track - mounts to base above:
Length (front to rear) - 13 "
Width (side to side) - 17 3/8" wide

All measurements are from centre hole to centre hole

Cheers

[jessef]

anyone can spare a few mins for the measurements ?

Cheers