Delica Canada | Mitsubishi Van Club

HI GUYS, NEWBIE (WELL TO HERE ANYWAY) ! i love the look as bruce(mystery machine has one her in the uk . i am doing mine soon but not this high.. i want a mad max styled lower but very beach /offroad orientated vehicle. 2 inch lift but 12"wide tyres and flared arches...nothing too mafor just width for stability and a wee lift for clearance.. these are cool vehicles..no ?

I wonder if you would get the same problems as the 400's get with high lifts?


But I must admit 300's are really starting to grow on me the more I look around this site, wouldn't ever get rid of Delisaurus but I wouldn't mind a 300 as well!!

No problems so far and it corners amazingly good. A little stiff on dirt of course, thats the counterpart.

DelicaSaurus hey, you bastards get to drive new ones... not fair that our government is so corrupt.

Give me a space gear lifted... snif..

Drooper wrote:I wonder if you would get the same problems as the 400's get with high lifts?


But I must admit 300's are really starting to grow on me the more I look around this site, wouldn't ever get rid of Delisaurus but I wouldn't mind a 300 as well!!

I am glad you are starting to come to your senses! I must say, you'll be an L300 convert in no time.

Josh

I really like the roof rack on your rig. Where did you get that from?

Marcel

mnewell wrote:I really like the roof rack on your rig. Where did you get that from?

Marcel

Standard JDM aluminum racks that come on many Pajero's, Landcruiser's, Delica's,etc..

Once in a while you see them on craigslist around 300-500.

josh wrote:

Drooper wrote:
I am glad you are starting to come to your senses! I must say, you'll be an L300 convert in no time.

Josh

Having seen Mystery Machine up close I know how cool they can look but I would only have one as well as mine, wouldn't get rid of Delisaurus to get one no matter how cool it looked.


She will be going up in the not to distant future (not by as much as 6 inchs) but apparantly if you take a 400 up to far there are problems with the sub frame cracking.

Thanks for all the discussion on lifted vans... it helps as a newbie to have all this info!

So something like this:

http://www.delica.ca/trader/list/Pindogger

is likely to handle how? Would it be bad on mileage? Cost an arm and leg to repair? Constantly prone to problems? Or just a whole lot of fun?

I say lift and lift away!!!

Don't know if any have heard of these kits. http://www.killeraxles.com/bolt_on_portale_e.html They are bolt on drop boxes to make portal axles.

When it comes to looks I always preferred wider than taller, aggressive like a tiger, not delicate like a moose. These kits allow lift of the axles along with wider stability. Instead of lifting your wheel wells for larger tires, they drop your wheels for larger tires. You can eliminate lengthening everything because your belly parts remain tucked up under and out of the way. The gears system helps displace torque on your 4x4 parts, reliving stress and eliminating some need for changing gear ratio with additional parts. A good match for a Deli, I say.

I see a lot of lifted trucks up here in the Oil and Gas Country. They get so high it looks as if their family jewels are dangling. I like practicality. Clearance yes, but with low centre of gravity is a winner.

I don't want to spoil anyone's love for tall machines or steal your joy, but I really do think these are a truly awesome mod for practicality and versatility sense. Especially on a Deli.

If I can swing a kit like this I will. These vans deserve the clearance, stability and ability to venture down low cut rabbit trails.

The original picture...
That is so Hot! or Hawt or...

wow... machine looks groovy with a little girl accessory to add flavor.
Nice.

FS