Canadian Parts

Does your Mitsubishi L300 make a strange noise? Need wheel alignment specs?
Joey
Posts: 1
Joined: Thu Mar 08, 2007 7:22 pm
Member's Photo Album: http://www.delica.ca/Photos/
Location: coquitlam
Contact:

inspections

Post by Joey »

I trying to get my delica ready for inspection,anything else I should change beside daytime running lights,some reflectors,headlights,and all BULBS?
where can I connect the wire for daytime running lights?(oil pressure sensor)did not locate it
Thanks
Joey
Adrock
Posts: 750
Joined: Fri Jan 12, 2007 11:02 am
Member's Photo Album: http://www.delica.ca/Photos/
Location: Richmond B.C.

Post by Adrock »

hi mount stop light apparently.

someone else should chime in on this though....
"if its so hard to pull on your knob, put some greese/wd40 on the shaft and pull in and out, that should make it happen for you."
-westcoastnewbie
Image
User avatar
Details Monster
Posts: 37
Joined: Mon Apr 28, 2008 11:26 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Delica L400
Location: Roberts Creek, BC
Location: Roberts Creek, BC

Re: Canadian Parts

Post by Details Monster »

I just replaced my front brake calipers; got semi-loaded from Lordco and they are now supplying the following caliper part numbers from Beck/Arnley (http://www.beckcatalog.com):

Front Left - 0770545S
Front Right - 0770546S
User avatar
Golf Cart
Posts: 857
Joined: Tue Jul 15, 2008 10:57 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1992 Exceed
Location: Maple Ridge

Re: Canadian Parts

Post by Golf Cart »

For the front brake upgrade ( Montero parts)

B/Arnley Rotors :083-2471

B/Arnley Calipers: 077-1059S & 077-1060S ( semi loaded)

Raybestos Ceramic Pads: PGD-530C
By the time you realize that my signature has no real message or life altering words of wisdom, you're too far into it to stop reading until you are finished
Post Reply

Return to “L300 Technical”