Delica Canada | Mitsubishi Van Club

fexlboi, do you know where i can get the aluminum hose fittings, bungs etc to weld onto the tank?
i will very soon be in the possession of a 5speed! my intention is to build a tank like yours, and another to install further up on the drivers side and connect with a hose like yours...

You can get everything at http://www.new-line.com or http://www.fairviewfittings.com in Burnaby (or some other locations)
The barb fittings I used are stainless steel. The aluminum bungs for the filler is a cut-off camlock the smaller bungs are regular from the store.