Page 6 of 6
Re: Manual Locking Hubs L300 & L400 - Group Buy
Posted: Mon Aug 09, 2010 7:37 am
by fexlboi
Shipping is not a problem, BUT there are additional costs and I also want to wait till everyone who wants them shipped replied. I don't wont to got to the Greyhound Depot over and over again.
Re: Manual Locking Hubs L300 & L400 - Group Buy
Posted: Mon Aug 09, 2010 10:20 pm
by Jsq
Firesong wrote:Can you find out the cost to ship those to me in Saskatoon?
Postal Code S7H4Y7
THanks
Firesong
I will be driving out to Vancouver on the 11th of August and returning to SK on the 23rd. I'd be happy to pick up and deliver if you can wait that long. Same goes for anyone else along the way or out this far. PM me if you want further contact details.
Cheers
Jsq
Re: Manual Locking Hubs L300 & L400 - Group Buy
Posted: Tue Aug 24, 2010 9:06 pm
by fexlboi
Last call for
nvanadm
mblack
gtexjunkie
to arrange pick-up or delivery via Greyhound Express. I contacted you multiple times via PMs, email or voicemail, but either no response or no decision.
I'm going to move by end of this week and don't want to take all the stuff with me to the new location. If I don't hear anything till Friday I'm going to sell them locally and I'll send you your money back (minus Paypal fees).
Re: Manual Locking Hubs L300 & L400 - Group Buy
Posted: Fri Aug 27, 2010 2:16 pm
by fexlboi
All right, almost all hubs are on their way to their owner.
Re: Manual Locking Hubs L300 & L400 - Group Buy
Posted: Thu Sep 02, 2010 6:33 pm
by nvanadm
Got the manual hubs today at Greyhound. $42 for shipping to Ontario...not bad.
Thanks
Re: Manual Locking Hubs L300 & L400 - Group Buy
Posted: Mon Nov 08, 2010 8:35 pm
by fexlboi
More of the Yijia manual hubs are coming in soon (mid Dec). Some extra sets available.
$200/set
Re: Manual Locking Hubs L300 & L400 - Group Buy
Posted: Tue Nov 09, 2010 12:38 pm
by thelazygreenfox
Guys
My manual hubs froze up on me recently just when I needed them.
Later I worked them loose, took them apart and oiled them. The drive shafts inside were wet also. Don't wait till you need them, engage them frequently.
I'm made up a little tool to assist engaging the hubs. Sometimes it's hard to get your fingers into that center bit and turn it. Especially when it's cold out.
TLGF
Re: Manual Locking Hubs L300 & L400 - Group Buy
Posted: Tue Nov 09, 2010 12:52 pm
by fexlboi
Did you use a gasket and greased the hubs before you installed them?
Re: Manual Locking Hubs L300 & L400 - Group Buy
Posted: Sun Nov 14, 2010 12:34 pm
by Firesong
I'm surprised actually.
Mine have been in water .. literally backed the boat down
the icy/snowy slope into the water to launch the boat
then parked 50 meters away.
Only thing that froze was my emergency brake line.. clunk.
Then off we went.
Damn boat motor wasn't all that eager that day though..
Firesong
Re: Manual Locking Hubs L300 & L400 - Group Buy
Posted: Sun Nov 14, 2010 9:32 pm
by thelazygreenfox
Yup the gasket was installed and the hubs were well greased when I installed them. They're okay now. I've talked with a few non deli 4X4ers that have had their hubs seize up.
I echo their advice . Engage them frequently.
TLGF
Re: Manual Locking Hubs L300 & L400 - Group Buy
Posted: Fri Dec 03, 2010 2:33 pm
by fexlboi
A new order of hubs just arrived in case someone is interested...
$200/set