Delica Canada | Mitsubishi Van Club

well under the hood and noticed a bit of oil leaking from the oil psi sensor on the front of the engine..... where can one get one of these or stop it from leaking.... I gave it a bit of a wiggle and seems tight..... any comments are appreciated gang....

The JDM dealers have them.

It's not L400-specific. You can get it locally. Just need to match up the part# on it. Someone posted it last year in the L400 tech section.

ok cool..... Jesse what the hell would we do without you..... I'll try to find some sort of number or email a dealer Thanks again....

Where is it leaking from? If it's just the threads you may be able to get away with a few wraps of teflon tape.

you'd continue being you !

I was a delica-noob not long ago and just took my mech skills + my google'ing skills and ended up with a good start. This forum was bustlin' a few years ago when things delica-esque were fresh.

There will always be a person more knowledgeable in a specific are than you and a person less knowledgeable. My living ethic is to learn from the first and pass onto the latter educating myself in the process. Good flow of info works well that way.

FYI
http://www.delica.ca/forum/missing-sensor-10859-15.html