Page 1 of 1
valve settings
Posted: Mon Sep 10, 2007 7:37 pm
by rdub
anyone know the or have the valve setting specs my ticking is getting worse and lasting a long time im a little cocerned thanks
Re: valve settings
Posted: Tue Sep 11, 2007 4:13 pm
by EricN
Under the engine cover. Mine says .25mm for both, I believe cold (I did mine cold). I also remember reading about the roller rocker tips failing but I wasn't sure if it was on the L300 or L400. When I did my adjustment (it was way out to lunch on 3, they were too tight), I loosened them all off and checked to make sure the roller tip wasn't all wobbly feeling. Then set the lash.