Delica Canada | Mitsubishi Van Club

Hi,
does anyone know if it`s possible to swap the newer style projector lights into a older style delica. I was wondering because the metal piece between the headlights is welded to the body and it is different on both styles...

Would appreciate a fast answer, because i have to order the parts soon...

We looked at it not to closely one night and decided you had to do body work...

Of course the person wanted to put the old style headlights in so they could actually see when driving at night :)

Hip to be square for sure.
Aahhhh zing!
Seriously though the newer style
left me quite unimpressed ,comparatively speaking.
Maybe with Piaa $$$ bulbs or
an HID addition $$$$.
To me the cheap squares
make sense. ¢¢¢

Right On!

If I'm not mistaken, the op has stated in a previous thread the desire to have the appearance of the new lights but will convert to HID!? I've taken a look at putting one of the newer Delica grill's on an older model and that, as well as I stalling new headlights, will require some, if not a lot of bodywork.

nxski wrote:If I'm not mistaken, the op has stated in a previous thread the desire to have the appearance of the new lights but will convert to HID!? I've taken a look at putting one of the newer Delica grill's on an older model and that, as well as I stalling new headlights, will require some, if not a lot of bodywork.

I know the OP likes the new front end.....but it is work to get poorer bulbs even with a HID conversion...

If you are going to do body work there are lots of better lights out there... It would look good with 7" rounds maybe with LED Lights!

Thanks guys. Not the answer i wanted to hear, but better to know it before than spent a lot of money at useless parts...

At least i don`t have to tell you guys why i want the newer style again and again...

thedjjack wrote:

nxski wrote:If I'm not mistaken, the op has stated in a previous thread the desire to have the appearance of the new lights but will convert to HID!? I've taken a look at putting one of the newer Delica grill's on an older model and that, as well as I stalling new headlights, will require some, if not a lot of bodywork.

I know the OP likes the new front end.....but it is work to get poorer bulbs even with a HID conversion...

If you are going to do body work there are lots of better lights out there... It would look good with 7" rounds maybe with LED Lights!

Good point, if you decide on doing some bodywork anyways it would be neat to see some really unique lights in there!

thedjjack wrote:

nxski wrote:If I'm not mistaken, the op has stated in a previous thread the desire to have the appearance of the new lights but will convert to HID!? I've taken a look at putting one of the newer Delica grill's on an older model and that, as well as I stalling new headlights, will require some, if not a lot of bodywork.

I know the OP likes the new front end.....but it is work to get poorer bulbs even with a HID conversion...

If you are going to do body work there are lots of better lights out there... It would look good with 7" rounds maybe with LED Lights!

So, the main light is an LED? Now you've piqued my interest.

Actually what I'm looking for is a 7" round with the city light in it, like the old VW's had, or European cars from the 60's.

Those lights in the picture are 7" regulars,,,but they do make 7" LED now....they are a little spendy the trucking industry uses them...

I have seen them posted on other forms.

Cheers

Main differences between the two types:
I don't know how available are these parts.
After a quick search i found an aftermarket, old-school head-panel here, in Hungary:
I think it isn't impossible, but is it necessary?