Page 1 of 1
L300 dome light cover help....
Posted: Mon Jun 10, 2013 10:16 pm
by gura119
Does anyone know the way to remove the cover of this dome light.....
I'm going to replace incandescent festoon bulb with a LED festoon bulb, But I cannot find the way to remove the cover. There aren't any screws outside.
Please help me guys...
Re: L300 dome light cover help....
Posted: Mon Jun 10, 2013 10:19 pm
by nxski
Screw driver in the side and pry.
Re: L300 dome light cover help....
Posted: Mon Jun 10, 2013 10:34 pm
by gura119
nxski wrote:Screw driver in the side and pry.
Thanks for the help bro...
But will it breaks when I attempt this.....
Re: L300 dome light cover help....
Posted: Mon Jun 10, 2013 10:36 pm
by nxski
It shouldn't. There should be a little groove on either side. if you pry gently, it should pop off very easily.
Re: L300 dome light cover help....
Posted: Tue Jun 11, 2013 2:57 am
by gura119
nxski wrote:It shouldn't. There should be a little groove on either side. if you pry gently, it should pop off very easily.
It worked, 
Thank you very much bro...