Page 1 of 1
L400 injection pump parts
Posted: Tue Oct 29, 2013 9:13 pm
by mac_stang
Does anyone have a parted out IP? My Cold start lever(throttle positioning actuator) has broken off, I have no way to adjust my cold start rpm...stuck at 400rpm.
Any help or suggestions of where to look are appreciated.
Brad.
Re: L400 injection pump parts
Posted: Tue Oct 29, 2013 9:56 pm
by thedjjack
old school like the L300 and just add a cable for a hand throttle
Let me Ghetto that for ya
Re: L400 injection pump parts
Posted: Wed Oct 30, 2013 9:38 am
by mac_stang
Doesn't sound like a bad idea considering availability of the parts...
Brad.
Re: L400 injection pump parts
Posted: Wed Oct 30, 2013 3:43 pm
by Rattlenbang
A diesel/injection place should be able to get parts if you give them the number off your pump. These things are pretty universal.
Re: L400 injection pump parts
Posted: Wed Oct 30, 2013 4:45 pm
by davidwwc
Brad,
Will adjusting the throttle cable helps ? Do it when the van is warm though.
DC
Re: L400 injection pump parts
Posted: Thu Oct 31, 2013 9:31 pm
by mac_stang
Thanks for the idea David, but sadly no, if I adjust the cable enough to increase idle at start....it ends up idling at 1500+rpm when warm.
I need to replace this part. I'm getting pretty sick of chasing my tail with this van, went in because of a stalling problem, now it doesn't idle high enough for a smooth start and basically is spewing fuel out the tail pipe. Thanks for the idea though.
Brad.