Page 1 of 1
					
				light out
				Posted: Fri Nov 08, 2013 8:08 pm
				by davidwwc
				My Delica's right lower beam is out. So I went to check and found that  the plug ( socket ) has melted down a bit .I unplugged it back but it won't work anymore. I thought I will replace it with a new one by cutting it out but a friend told me not to but repair it . What is your opinion? Is it possible to find a replaceable part? 
Thx,
DC
			 
			
					
				Re: light out
				Posted: Sat Nov 09, 2013 8:30 am
				by Big-Bird
				Pull the bulb and if it appears okay visually do a bench test and check it with a multi-meter or battery charger/jumper wires-battery. Just because an element looks okay doesn't always mean it is. 
Test your plug connection as well to ensure the wires are not burned/broken.
The H4 headlight plug body can be purchased from local parts outlets.....Cajun-Tire should have it but Napa, Partsource ........are more likely.
Wire repairs if needed are easy, just use a good quality soldering tool and solder and use heat-shrink tubing to protect any repairs. Electrical tape can be used as a secondary barrier if desired.
			 
			
					
				Re: light out
				Posted: Sat Nov 09, 2013 6:21 pm
				by davidwwc
				Thanks Big Bird. I will try out your suggestion. Hope I can get the replacement plug connector. I am told if cut the wire , it has to be connect back very good. 
DC
			 
			
					
				Re: light out
				Posted: Mon Nov 11, 2013 11:06 am
				by TieMyShoe
				stripped, soldered, shrink wrapped. Even better if you put liquid electrical tape under the heat shrink... but not mandatory.
			 
			
					
				Re: light out
				Posted: Mon Nov 11, 2013 11:30 pm
				by davidwwc
				Thanks. I will have to if I cannot repair the plug. Yes seems that that's the best way connecting together. 
DC