Delica Canada | Mitsubishi Van Club

Posted: **Wed Nov 12, 2014 8:15 pm**

Who is selling them? prefer in BC.

Posted: **Thu Nov 13, 2014 6:15 am**

You can check with rising sun. I know they fitted mine with one when I bought the van.

Posted: **Fri Nov 14, 2014 3:32 pm**

Why you should KEEP the EGR:
http://www.tuneruniversity.com/blog/201 ... you-money/

Posted: **Fri Nov 14, 2014 11:55 pm**

that seems like a good resource i will look further into it thx.

Posted: **Fri Nov 14, 2014 11:57 pm**

Yokohama wrote:Why you should KEEP the EGR ON A GAS MOTOR:
http://www.tuneruniversity.com/blog/201 ... you-money/

Fixed that for you.... article is about gas engines not diesels...

Posted: **Sat Nov 15, 2014 6:26 am**

thedjjack wrote:
Yokohama wrote:Why you should KEEP the EGR ON A GAS MOTOR:
http://www.tuneruniversity.com/blog/201 ... you-money/
Fixed that for you.... article is about gas engines not diesels...

Yes, thank you! That would only apply if the OP has a gas motor.

Posted: **Sat Nov 15, 2014 9:28 am**

If you don't want the EGR you don't need to put in a blank - simply disconnect the vacuum hose that hose that engages it.

Posted: **Sat Nov 15, 2014 11:10 am**

konadog wrote:If you don't want the EGR you don't need to put in a blank - simply disconnect the vacuum hose that hose that engages it.

As an addition to Konadog's observation ~ put a machine screw into the end of the vacuum hose when you take it off.

Falco.

Posted: **Sat Nov 22, 2014 2:14 pm**

Frost plug fits perfectly inside the EGR as well.

Delica Canada | Mitsubishi Van Club

WTB EGR blanking plate

WTB EGR blanking plate

WTB EGR blanking plate

Re: WTB EGR blanking plate

Re: WTB EGR blanking plate

Re: WTB EGR blanking plate

Re: WTB EGR blanking plate

Re: WTB EGR blanking plate

Re: WTB EGR blanking plate

Re: WTB EGR blanking plate