Page 1 of 1
Steering Wheel Crossovers?
Posted: Tue Aug 30, 2016 10:58 am
by pj_jazzy_janz
So, the wrap on my steering wheel was worn when I bought the van last summer. It wasn't too bad, but it's gotten worse over the year, and I'd like a solution. Apparently, to re-wrap it would cost around $600, which I don't have. Does anyone know of other vehicles whose steering wheels can be switched over to a Delica? I'm hoping to find something at a wrecker's, maybe...
- SW.jpg (19.44 KiB) Viewed 7563 times
Re: Steering Wheel Crossovers?
Posted: Tue Aug 30, 2016 9:32 pm
by ChuckBlack
Just buy bicycles handlebar wrap at your locale bike shop... Many color to choose and a much cheaper alternative!!
Re: Steering Wheel Crossovers?
Posted: Wed Aug 31, 2016 1:49 am
by gezzza
My mate fit a 90's Mitsy mirage wheel on his L300. Bolted straight on, so I assume other Mitsy models are compatible.
Re: Steering Wheel Crossovers?
Posted: Wed Aug 31, 2016 12:05 pm
by pj_jazzy_janz
ChuckBlack wrote:Just buy bicycles handlebar wrap at your locale bike shop... Many color to choose and a much cheaper alternative!!
BRILLIANT!!! I may have to look into that...
Re: Steering Wheel Crossovers?
Posted: Thu Sep 01, 2016 2:29 am
by Wobby
On my old Delica I had a sports wheel that was fitted to a Mitsubishi Lancer.
I have also heard of others using a Pajero wheel with no issues
Sent from my iPad using Tapatalk HD
Re: Steering Wheel Crossovers?
Posted: Wed Sep 07, 2016 10:47 pm
by antsaf
what about wheelskins.com they are pretty awesome and you can provide your own measurements for whatever you want.
Re: Steering Wheel Crossovers?
Posted: Thu Sep 08, 2016 9:59 pm
by ChuckBlack
canadien tire special,,, Steering wheel cover!!!
http://www.canadiantire.ca/en/pdp/montr ... p.html#srp
Go Habs Go!!!
Re: Steering Wheel Crossovers?
Posted: Sun Sep 11, 2016 7:40 pm
by FalcoColumbarius
I concur. I got one like that, except sans Habs logo. After installing the snake, I tied three long strands of whipping twine off together at one end and put the other three ends into the black chuck of my screw gun, pulled the trigger and wound them up. Then wrapped my wheel with the combo twine, like this:
Really good for palming.
Falco.