OIl Filter Victoria

Does your Mitsubishi L300 make a strange noise? Need wheel alignment specs?
Post Reply
stugots1982
Posts: 60
Joined: Fri May 13, 2016 11:53 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1992 delica l300
Location: victoria bc

OIl Filter Victoria

Post by stugots1982 »

Hey Guys trying to track down an oil filter in Victoria. My usual shop cant get one until next week. Wondering where everyone else gets theirs?

Cheers in advance

Stu
User avatar
ChuckBlack
Posts: 333
Joined: Tue Mar 17, 2015 9:27 pm
Member's Photo Album: http://www.delica.ca/Photos/Bingo
Vehicle: L300 Jasper
Location: St. Albert AB

Re: OIl Filter Victoria

Post by ChuckBlack »

Napa, lordco, Canadian tire, dash auto, gregg distribution,
L300 Jasper, :-D
L300 Chamonix, :-)
Pajero Mini, :-(
Pajero GDI :o
Pajero DiD 8-)
stugots1982
Posts: 60
Joined: Fri May 13, 2016 11:53 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1992 delica l300
Location: victoria bc

Re: OIl Filter Victoria

Post by stugots1982 »

well I tried lordco and a filter that typically runs me around 30 dollars they want 68. So I figured I would look around Canadian tire looked at me like I was actually from Japan. hahah
User avatar
lrp374
Posts: 1023
Joined: Sun Nov 23, 2008 9:56 pm
Vehicle: 91 Super Exceed
Location: Kamloops

Re: OIl Filter Victoria

Post by lrp374 »

Peterbuilt can usually get them overnight to Kamloops. They have Baldwin BD-28 for about $ 22. I assume they have a shop in Victoria.
User avatar
north54
Posts: 194
Joined: Tue Oct 01, 2013 10:29 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1989 P35W
Location: Vancouver

OIl Filter Victoria

Post by north54 »

+1 on Peterbilt, they have a parts & service in Nanaimo. I usually stock up from them and purchase 2 BD-28's and 2 Baldwin air filters from the Surrey location. Their prices are worth it.
TRUSTY RUSTY
john clem
Posts: 56
Joined: Wed Oct 10, 2007 11:38 pm
Vehicle: 1992 delica

OIl Filter Victoria

Post by john clem »

rocky mountain imports have them>> japanese brand>>higher micron than others
Post Reply

Return to “L300 Technical”