Page 1 of 1
					
				Bosch fog/flood's need properly wired
				Posted: Thu May 18, 2017 8:11 am
				by Zebruken
				Do any of you have insights into the wiring of the flood/fog lights. I have 2 plugs with 3 wires in each. But the Bosche lights on my van only have 2 wires (power & ground).
Were the stock flood/fogs a high/low beam?
			 
			
					
				Bosch fog/flood's need properly wired
				Posted: Thu May 18, 2017 12:04 pm
				by Morgonzo
				what year l300? On my 88 the fogs are not Hi/Lo switchable, but is only an Exceed. I don't know if that was an option on the Super and Royal trim levels but I doubt it. It'd be cool though 

 I've never had my fog's apart but it looks like a one bulb/one clip affair. My fog's are labeled MM400 Magnum if that helps.
 
			 
			
					
				Bosch fog/flood's need properly wired
				Posted: Thu May 18, 2017 11:16 pm
				by Overlanderjay
				Are you sure your dealing with stock Mitsubishi wiring or aftermarket wiring Delis never came with high/low foglights    Cheers Jay