Page 1 of 2

l400 GAS block heater install

Posted: Sat Oct 14, 2017 9:15 am
by barrett
Hello all. I am a 2002 l400 owner in need of a block heat install and no mechanic I can find has a clue which frost plug to put it in. Given the engine model the plug suggests either RR or RC. Anyone have any insight into this matter? I did a search on the site and was rather surprised I found very little info on the l400 gassers/block heater install. Perhaps I was looking in the wrong place. If so, please point me in the right direction. Thanks for your time.

l400 GAS block heater install

Posted: Sat Oct 14, 2017 9:23 am
by manitoba
i’m interested as well - i found the block heater unit at ccautos.ca
http://www.ccautos.ca/l400-block-heater-3l-v6-gas/


Sent from my iPhone using Tapatalk

l400 GAS block heater install

Posted: Sun Oct 15, 2017 7:08 pm
by barrett
yeah, that looks similar to what I got. Let me know if you find out which frost plug it goes best in!

l400 GAS block heater install

Posted: Sun Oct 15, 2017 9:13 pm
by manitoba
will do!


Sent from my iPhone using Tapatalk

l400 GAS block heater install

Posted: Mon Oct 16, 2017 5:28 am
by Ralph in Winnipeg
Gentlemen, I would highly recommend a Polar Pad available at Canadian Tire. 15 minutes to install and you don't have to drain any fluids. They work great. I have one on my Strada, my Subaru and have installed them on a number of minitrucks. I don't know about the slightly cheaper other brands but the Polar Pad on my Subaru has gotten me through 6 Winnipeg winters and is ready for the seventh. Ralph in Winnipeg.

l400 GAS block heater install

Posted: Mon Oct 16, 2017 7:05 am
by manitoba
I’ve never heard of such a thing! thanks!


Sent from my iPhone using Tapatalk

l400 GAS block heater install

Posted: Mon Oct 16, 2017 2:43 pm
by Ralph in Winnipeg
No worries. There are pics of my install in the Strada area. So simple and very effective. Ralph in Winnipeg

l400 GAS block heater install

Posted: Mon Oct 16, 2017 2:55 pm
by manitoba
Ralph in Winnipeg wrote:No worries. There are pics of my install in the Strada area. So simple and very effective. Ralph in Winnipeg
very cool - i’m reading your thread, love to see your strata in person !


Sent from my iPhone using Tapatalk

l400 GAS block heater install

Posted: Mon Oct 16, 2017 4:29 pm
by barrett
Hey Ralph.
I used to use one in my vw beetle (aircooled). It helped foresure. My impression was with an antifreeze warmer it makes the head warmer preventing oil creep up into the heads in the winter and conversely, some washout as well. Im not sure a less viscous oil would help this. It wWILL make your engine turn over easier however.

Also Manitoba...There are inline warmers available...It might be the route I go.

l400 GAS block heater install

Posted: Tue Oct 17, 2017 4:28 pm
by Ralph in Winnipeg
Hi manitoba, if you want to check out my Strada let me know (invite open to all Manitoba delica owners). I'd love to have a diesel chat with local folks. Time press - I'm parking the truck for the winter next week so it would have to happen Saturday. I'm in st. James on Linwood Street. Let me know!

Hi barret, I looked at the inline heaters and have had them on various other vehicles but I have had good experiences with the Polar Pad. And I didn't have to cut a rad hose etc, etc. I usually switch to lighter oil in the winter in my daihatsu and subaru from 10w30 to 5w30. It sure helps starting any vehicle in the cold as well as a good battery and robust electrical system. The Strada gets parked so 15w40 semi synthetic all the time.

Ralph in Winnipeg

l400 GAS block heater install

Posted: Wed Oct 18, 2017 5:40 am
by manitoba
thanks for the invite Ralph! it may have to wait till spring, not sure i’ll get to wpg before saturday


Sent from my iPhone using Tapatalk

l400 GAS block heater install

Posted: Fri Oct 20, 2017 5:17 am
by Ralph in Winnipeg
No worries. I would definitely be in for a spring meet up! Where abouts are you in the province? Ralph in Winnipeg

l400 GAS block heater install

Posted: Fri Oct 20, 2017 5:44 am
by manitoba
Ralph in Winnipeg wrote:No worries. I would definitely be in for a spring meet up! Where abouts are you in the province? Ralph in Winnipeg
Not far! just outside Portage la Prairie


Sent from my iPhone using Tapatalk

l400 GAS block heater install

Posted: Thu Nov 02, 2017 10:04 am
by Majorcnut
Hi Barrett,

Did you end up installing a frost plug block heater in your V6?

I may be picking up a gas Delica S3 next week and would need to install a block heater in it also. Trying to figure out the model of heater and where to install it.

Thanks

l400 GAS block heater install

Posted: Thu Nov 02, 2017 10:13 am
by barrett
I have a zerostart 3100055 plug which fits. And it goes in the rc plug hole. Haven't had a chance to get it in yet however. Looks pretty straight forward other than taking air intake off.