Page 1 of 1

New Deli in Saskatchewan! Hello!

Posted: Tue Jul 23, 2019 9:49 pm
by finalfunk
Hey Folks, last week I picked up a 2000 l400 Super Exceed in Vancouver, fresh off the boat, and drove er back to NW Saskatchewan. It's a 3L gasser SWB with the 'winter package'.
Got it saftied and now the fun begins! I'm thinking it'll eventually be turned into a camper so looking into in-cab heating options and where in the deli to place it. Has 2nd row captain chairs so I'll be keeping the left one as it folds up rather nicely.
Tempted to throw a 2" leveling kit on it but unsure if it's worth the extra wear and fuel atm. (Also has ECS)
Looking into installing cruise control as well.
Will need someway to heat the engine during the frigid winters so I'm leaning towards installing a coolant heater.
Appreciate all the help on this site and Happy to finally be part of the Delica Community.
Cheers,
-Patrick-

New Deli in Saskatchewan! Hello!

Posted: Wed Jul 24, 2019 5:39 am
by Ralph in Winnipeg
Welcome! Post a picture when you have a chance. There's lots of info here and some real helpful folks, don't be shy.
Ralph in Winnipeg

New Deli in Saskatchewan! Hello!

Posted: Wed Jul 24, 2019 6:55 am
by Khrolar
Welcome Patrick!

You mentioned that you were installing a secondary Diesel heater for your van. I think some guys have removed the rear heating unit and used the piping for the Diesel heater. It's what I have always wanted to do along with adding a breather fan.
There's a ton of info here, but sometimes it can take a bit of digging to really find what you want.
Best of luck with your van and post a picture when you can. I believe they have to be 500kb or less in size to upload them, I always have to compress my photos.

Peter

New Deli in Saskatchewan! Hello!

Posted: Thu Jul 25, 2019 9:00 pm
by finalfunk
Thanks for the welcome and the tips guys! I'll have to look into how the removal and install would work for the rear heating unit.
Here's my new project...
IMG_9849.jpg
IMG_9849.jpg (98.87 KiB) Viewed 4048 times