Delica Canada | Mitsubishi Van Club

For those of you who need the space in the back and have the time (and a welder) but don't have the money. Here is an alternative to a side mount exhaust.

I cut the tail pipe off to install my home made trailer hitch. It wasn't really necessary but it was just in the way. As air care requires a tail pipe to shove thier sniffer up I needed to either put it back on or put the exhaust out the side. I chose the later.

I didn't have the money to have a nice 2 1/2" stainless installed so I just took my old muffler and piping, did a little zip cutting and welding. Ta-Da, a cheap and effective alternative.

It won't last as long but it did the job.

Just thought you'd all like to see.

Andrew

Good job !

I have to go over to my pals house and use his welder to do the same thing soon.I want to convert to wvo shortly !!! Specially as gas prices go up and down every 4 hours or so in this country !!!

anyway..........good idea and good job....

I did about the same thing too! I already had a 2.25" exhaust, just hacked it up and tacked it back together.





I'd like to fix it up real nice with the tip I bought on the full-length system, but the muffler rattles, so even though it's stainless I'll be saving up for a new one before I do that.