Page 1 of 1
replacing wheel lock bulb
Posted: Mon Oct 06, 2008 8:35 pm
by brewskie
My wheel lock bulb is cooked. Anyone know what bulb I need and how to replace it?
Cheers
Rob
Re: replacing wheel lock bulb
Posted: Mon Oct 06, 2008 9:46 pm
by 39Ronin
You need the OSRAM 2721 I believe.
http://www.bulbtronics.com/lamps-bulbs/ ... -2721.html
I bought them at NAPA and they said the local transit buses use them.
Re: replacing wheel lock bulb
Posted: Tue Oct 07, 2008 3:34 am
by g_man1972
Hey Brewski,
Let us know how it went and how hard it was, as I have to do mine too. Also need to do the one for the little D for drive.
Thanks
Gary
Re: replacing wheel lock bulb
Posted: Sat Oct 11, 2008 1:53 pm
by brewskie
OK so I have the bulb in hand. Now I just need to install it. There is a great speedo removal how to in the FAQ section, but how do I get into where the bulbs are?
Cheers
Re: replacing wheel lock bulb
Posted: Sat Oct 11, 2008 5:39 pm
by 39Ronin
After you remove the cluster, you will see black sockets (plug like things). They house the bulbs, so twist them out. You may have to tug hard on the bulb to remove it from the socket. Thats it!
Re: replacing wheel lock bulb
Posted: Mon Oct 13, 2008 9:01 am
by after oil
brewskie wrote:OK so I have the bulb in hand. Now I just need to install it. There is a great speedo removal how to in the FAQ section, but how do I get into where the bulbs are?
Cheers
post some pictures if you can please, mine is cooked too