Page 1 of 1
SS exhaust? Any one have one?
Posted: Wed Feb 18, 2009 7:12 pm
by InTheForest
Looking for Stainless Exhaust. From the turbo preferably. Must be in good condition. Noel, Glen, Mardy, I'm looking at you. Hmmm?
Re: SS exhaust? Any one have one?
Posted: Wed Feb 18, 2009 11:04 pm
by MardyDelica
hi, there is nothing from the turbo.
the one i have a replacement installed from my delica is from japan. but only goes as far as the exhaust manifold. then from then it has 2 bolts on it. that where my replacement delica stainless joint. it expensive but nice no to much bending & welding insome small corner not look nice. this is direct fit. factory made. cost for new one my cost is & $850.
if you want i can order for you but prepaid. no cheap.
hope this help you.
cheers;
Mardy
Re: SS exhaust? Any one have one?
Posted: Thu Feb 19, 2009 1:46 am
by nishby
I just had one installed at CVI today. I'm pretty sure he has more and it runs from the turbo to the tip. $800 installed.
And if anyone is wondering if the Delica tune at CVI is worth the cash...WOW. My new van was already running nice, but what an incredible difference. Quicker, smoother starts, quicker smoother shifts, and waaaaaay more power! Thanks Edwin.
Re: SS exhaust? Any one have one?
Posted: Sun Mar 08, 2009 8:41 pm
by EnviroImports.com
you know my phone number charles, let me know if your still looking.
ttyl
Re: SS exhaust? Any one have one?
Posted: Tue Mar 10, 2009 7:37 am
by bionic
..currently running full stainless Flo-Pro 2.5" exhaust. I fabricate/weld them myself out of 304. It utilizes the stock 2 bolt conical manifold mount . The exhaust exits out of the driverside forward of the rear wheel arch. I can make one for those interested for around 450.00.(using a FLO-PRO full stainless muffler) Mine does use a bracket installed on the inside of the rocker for support(2 screws). Your choice of muffler will effect price (as long as it does not exceed 18" in length)
-Chad