Delica Canada | Mitsubishi Van Club

Okay folks last week i attempted to reseal the front quarter panels but didnt succeed due to stubborn screws on the last bit.

Part of this process meant removing the headlight, whilst i was removing mine i noticed a spare connector. Is this normal or wht am i missing? I cant seem to find a receptive connection on the headlight unit itself.
I do know my front lights on bullbar have never worked/no switch is this related? ie on main beam all the front lights light up?

pic below highlighting the offender :lol: the connector to the right (on my little finger :lol: ) is the only one i needed to disconnect to remove the headlamp assembly.

thanks in advance

Miller,

Take a test light to the phantom plug and start doing the trial and error dance to see what turns up, or on.

My harness only has the 3 prong on my 92 , and didn't come with any fog lights.

From memory I can't be sure, but I think that may be the connector for the side cornering light (white light directly bellow the side amber signal light, comes on solid whenever you signal that direction)

Green1 wrote:From memory I can't be sure, but I think that may be the connector for the side cornering light (white light directly bellow the side amber signal light, comes on solid whenever you signal that direction)

Nope, thats all working fine,this connector aint connected!

Mike