Page 1 of 1

Need a new internal/external Temp display for pod

Posted: Thu Jul 16, 2009 7:48 pm
by snelson
If anyone has a functioning internal/external temp display module that sits inside the 3 dial pod (altimeter, angleometer thingy, and temp) I could really use one.

The one I have now barely displays the temps. If I whack it really hard, it gets nice and bright for 5-10 seconds, then quickly goes black again...
Thanks
Steve

Re: Need a new internal/external Temp display for pod

Posted: Thu Jul 16, 2009 8:58 pm
by Luna-Sea
If I whack it really hard, it gets nice and bright for 5-10 seconds, then quickly goes black again...
I thought I was into my Deli! :-D

Seriously(ish) as always CC auto will send you one,
I also thought I saw a new sender unit on the Japanoid site
a while back.
The one in my high-roof works intermitently at best.

Right on! 8-)

Re: Need a new internal/external Temp display for pod

Posted: Thu Jul 16, 2009 9:07 pm
by Profister
PM sent.

Re: Need a new internal/external Temp display for pod

Posted: Thu Jul 16, 2009 10:51 pm
by loki
take a look at delcar 300's mods he added led banks behind the units in the pod and really brightened them up.