Help with dashboard switches L300 and central locking
Posted: Sun Aug 30, 2009 8:57 am
Okies, ive installed my remote central locking kit and its working fine on front doors + side door.
Im left with 2 wires to install for boot unlock and sidelights or hazard light function.
I now need to know what wire to splice into on the dash mounted Hazard switch and boot lock/unlock dash mounted switch to finish the installation.
The dash mounted Boot lock/unlock switch has 6 wires - 2X black, 2X blue, 1 X red and 1X green (all with dashes of different colour)
The dash mounted hazard lock switch is just swarming with wires hehe so im also happy to wire into the side lights instead if its easier?
(The remote central locking control unit has a jumper for gate unlock that can be set to ground or +12v)
Wiring diagrams in my russek manual are as clear as mud similar to the PDF wiring diagrams ive seen.
Dont suppose anyone knows which wires are needed before I take my back door apart and run my own wires back direct from solenoid??
Im left with 2 wires to install for boot unlock and sidelights or hazard light function.
I now need to know what wire to splice into on the dash mounted Hazard switch and boot lock/unlock dash mounted switch to finish the installation.
The dash mounted Boot lock/unlock switch has 6 wires - 2X black, 2X blue, 1 X red and 1X green (all with dashes of different colour)
The dash mounted hazard lock switch is just swarming with wires hehe so im also happy to wire into the side lights instead if its easier?
(The remote central locking control unit has a jumper for gate unlock that can be set to ground or +12v)
Wiring diagrams in my russek manual are as clear as mud similar to the PDF wiring diagrams ive seen.
Dont suppose anyone knows which wires are needed before I take my back door apart and run my own wires back direct from solenoid??