Delica Canada | Mitsubishi Van Club

Hi All:
my auto hubs are shot need to replace,don't have a clue where to get parts.I was at the Toyota 4x4 shop in kamloops they said i should get manual hubs but are not sure if they will fit.Is there anybody out there that has installed manual hubs? Sure could use some advice 1991 Delica exceed
5 speed standard trying to get this done before the white stuff falls...

How do you know that they are all shot?
Just curious what the symptoms are.
Thanks
J

theres a whole crew that swapped for manual hubs, looks simple enough. one of em will speak up shortly im sure.

Search for manual hubs and thread author "jfarsang" he did a great write up and how to with part numbers and sources for the manual hubs.
If you can undo a few bolts, you can do the hub swap yourself in a couple hours....

Superwinch Hubs
Part # 400543
82-90 Montero

Thats right off the box

Here you go...

http://www.delica.ca/forum/superwinch-m ... -4437.html

hi, check the clipon the front axle first before you buy maybe your clip is loose.
cheers;
Mardy