Page 1 of 1
Tuflok source
Posted: Fri Nov 06, 2009 12:48 pm
by Drumster
There's a number of removable plastic fastener/rivet type things on our Dellies, commonly called Tuflok rivets. The grill is held in place with one type of these and the front edge of "bash plate" (plastic dust guard) with another.
Any idea who sells such fasteners?
Cheers!
Re: Tuflok source
Posted: Fri Nov 06, 2009 6:37 pm
by Adam
I think I've seen them at Lordco, but don't quote me on that.
Re: Tuflok source
Posted: Sun Nov 08, 2009 8:26 pm
by Drumster
Adam wrote:I think I've seen them at Lordco, but don't quote me on that.
Yep, you're quite right. 
At least I found something very similar at Lordco to replace the four holding on my grill. (Three of the four originals had managed to fall out over the last 15 years.) So I went ahead and replaced all four and now everything's snug & solid once again.
Cheers!
Re: Tuflok source
Posted: Mon Nov 09, 2009 4:40 am
by wetcoast
Drumster wrote:Adam wrote:I think I've seen them at Lordco, but don't quote me on that.
Yep, you're quite right. At least I found something very similar at Lordco to replace the four holding on my grill. (Three of the four originals had managed to fall out over the last 15 years.) So I went ahead and replaced all four and now everything's snug & solid once again.
Cheers!
Part number on the packaging??? Thanks!
Re: Tuflok source
Posted: Wed Nov 11, 2009 1:15 am
by Drumster
Part # on invoice is 14260. It's just called "Toyota Screw".
Cheers!