Page 1 of 1
L400 Intercooler Dimensions
Posted: Sat Feb 27, 2010 7:37 pm
by psilosin
Just wondering if someone with an L400 can post up the dimensions of the intercooler. Overall length x width x thickness including the inlet/oulets and also the diameter of the inlet/oulets.
And how about the piping that leads to/from the intercooler...it lookes like braided hose...is it very flexible or does it just look that way?
Looking at options for intercooling my Hilux Surf and the Delica L400 intercooler is on the short list.
Re: L400 Intercooler Dimensions
Posted: Sun Feb 28, 2010 11:07 pm
by Mephisto
I would have to run out to the garage to get the measurements and I'm feeling lazy, but if you buy me a case of wobbly pops you can have my intercooler from my pajero, pretty much exactly like an L400s cooler. Yes the charge pipes are flexible, approximately 2inch ID.
Re: L400 Intercooler Dimensions
Posted: Sun Feb 28, 2010 11:46 pm
by thedjjack
If psilosin does not take the intercooler from you...I would love it.
Cheers
Email me:
thedjjack@gmail.com or PM
Re: L400 Intercooler Dimensions
Posted: Mon Mar 01, 2010 10:24 am
by psilosin
Thats a good offer that I would definately jump on if its fo' real
PM me and I can have my wobbly pop delivery guy be over in a flash.
Re: L400 Intercooler Dimensions
Posted: Tue Mar 02, 2010 10:05 am
by Mephisto
PM sent, as for dimensions I'll post them here so they are generally available. Just under 8 inches across, 14.75 long, and 2.5 thick, that is just the cooler dimensions, there are various flanges and brackets extending beyond although these could easily be cut off if they impeded installment. Tubes are 1 7/8 ID but will just stretch over 2 inch tubing. I didn't take the tubes off of the cooler, but it appears that the pipe stubs are about 1 3/4 OD and the tubes have an insert to bring it down to that size.