Page 1 of 1
EGT Gauge
Posted: Tue Mar 30, 2010 10:39 am
by Pajero
Hey I have a 94 2.8l pajero and am going to install a egt gauge but I\m not sure which one to buy, other than I'm going to go with the glow shift gauge but they have one that goes to 1500F and one that goes to 2400F I think that the one that goes to 1500f would be easier to read but I dont know if that is too close to the temperatures these run at. And what would be the
"danger zone" when it comes to EGT's?
http://www.glowshiftdirect.com/black-face-gauges.aspx
Thanks Joe
Re: EGT Gauge
Posted: Wed Mar 31, 2010 8:21 pm
by Pajero
I tried searching in the forum for this info but no luck......anyone know where I can look?
Re: EGT Gauge
Posted: Wed Mar 31, 2010 11:13 pm
by FalcoColumbarius
Try typing in "pyro" and see where that takes you... smiles.
Falco.
Re: EGT Gauge
Posted: Thu Apr 01, 2010 6:30 am
by loki
search egt*
Re: EGT Gauge
Posted: Thu Apr 01, 2010 9:55 am
by jessef
Get the one that goes to 1500F
The 4M40 operates cooler on the exh/turbo side than the 4D56T especially with the larger exhaust.
Re: EGT Gauge
Posted: Thu Apr 01, 2010 8:15 pm
by Pajero
Thanks, just ordered the 1500F one, thats the info I wanted to know
Re: EGT Gauge
Posted: Sun Apr 25, 2010 5:29 pm
by Pajerist
Please update with pics, if you have them of cause...
Thanks,