Delica Canada | Mitsubishi Van Club

how do i remove the front side turn signals? all i can find is one screw which does really nothing. Any help would be great!

There is also a sprung hook on the inner fender that holds the turn signal lamps on as well the screw.The lamps are also normally stuck in position so a little persuasion is normally required once the screw and spring clip are removed.

Also you need to release spring holding turn light inside of engine bay.
If you have 2,5 LWB and talking about right corner (driver's side) you'll need to remove air filter.
At least what I remember (it was more than 3 years ago...)
Post a pictures, can be helpful...

Good luck,