Page 1 of 1
L400 Air Intake
Posted: Sun Jun 27, 2010 10:08 pm
by Mr. Flibble
I was looking at the air intake on my L400 (sorry, no photos, it is dark at the moment) and I noticed that the air intake seems to come from inside the bodywork next to the air filter?
Is the actual air intake coming in from the body down by the wheel?
I wish I could describe this better, but the intake next to the air filter matches up against the side of the body quite neatly.
On a side note, is the L400 filter washable? And where (in Victoria) can filters for a L400 be found? (I know where to find them in Vancouver.)
Re: L400 Air Intake
Posted: Sun Jun 27, 2010 10:32 pm
by jessef
It comes in from the wheelwell/front quarterpanel (airflow)
Brakeclean + air hose and blower.
But I'd rather get a new air filter. It makes a big difference new compared to old/dirty.
Re: L400 Air Intake
Posted: Mon Jun 28, 2010 7:00 am
by mararmeisto
This is a common point for air intakes from this time-period onward. As the front grille of vehicles started to disappear, the routing of air flow over and into the engine began to take different paths than direct.
One advantage to having the air intake tucked into the fender like that is a lessening of bug impacts and road spray (nothing destroys a paper filter like water). I also read once that a smoother airflow is possible (i.e. air flow into the engine is not as affected by gusts, which is important in the ever-increasing amount of computerization that we begin to see in vehicles at this point).
Re: L400 Air Intake
Posted: Thu Sep 09, 2010 10:06 pm
by mac_stang
it is only done to keep the air clean and cool.
Re: L400 Air Intake
Posted: Fri Sep 10, 2010 7:57 am
by strada-caster
mac_stang wrote:it is only done to keep the air clean and cool.
I agree, I just made this mod to my strada as before it was sucking in hot air from in the engine bay. Now I just have to eliminate the 'whizzing' sound it has made (most likely because its not sealed from the engine bay yet and sucking air in from all sorts of directions or a burr in the pipe).
Re: L400 Air Intake
Posted: Fri Sep 10, 2010 11:59 am
by Mr. Flibble
Well, I will be modifying it even more when I install my L400 Snorkel on my Deli in a month or two
. I think I will be the first L400 owner to have a Snorkel fitted in Canada...
Makes me nervous.
Re: L400 Air Intake
Posted: Fri Sep 10, 2010 12:09 pm
by mararmeisto
Mr. Flibble wrote:Well, I will be modifying it even more when I install my L400 Snorkel on my Deli in a month or two
. I think I will be the first L400 owner to have a Snorkel fitted in Canada...
Makes me nervous.
Oh! Can I drill the hole in your fender-panel? Let me! Can I?