M12 oil drain plug
Posted: Tue Sep 14, 2010 4:29 pm
So far the search engine has produced the M12 bolt as the oil pan drain plug.
L300 engine.
Has this been confirmed?
L300 engine.
Has this been confirmed?
Delica Canada | Mitsubishi Van Club
Forum for Mitsubishi Delica owners and enthusiasts.
http://www.delica.ca/forum/
M12 oil drain plug
Page 1 of 1
Re: M12 oil drain plug
Posted: Tue Sep 14, 2010 9:07 pm
As far as I remember I was using the M17 wrench, so the tread should be M14.
Re: M12 oil drain plug
Posted: Wed Sep 15, 2010 7:54 am
Thank-you.
I will post confirmation today.
I will post confirmation today.
Re: M12 oil drain plug
Posted: Wed Sep 15, 2010 9:26 am
M14-1.50 (65426) "Oil-Tite". With molded gasket.
$5.00 Part Source.
$5.00 Part Source.
Re: M12 oil drain plug
Posted: Wed Sep 15, 2010 8:46 pm
Last oil change I did the guys I bought the filter from didn't have any crush washers so I re-used (shudder) my old one. Anyway, in case this happens again in the future, has anyone used one of those generic copper crush washers you can get at Canadian Tire? I know the aluminum ones for the Delica's seem to be a folded type with a lip, I'm just wondering if a flat copper one would leak?
Re: M12 oil drain plug
Posted: Wed Sep 15, 2010 10:44 pm
Absolutely. I even used plastic ones from CT.