Delica Canada | Mitsubishi Van Club

I thought I'd let you all know about this as I had such a difficult time finding these brackets. It's not because they're not available, it's just because sellers don't provide manufacturer name, part numbers etc.
So for any of you who're interested, here's all the pertinent details you need to do a search. (These are 1 - 7/8 diameter - same as L400 bull bar.)



Cheers!

Good one Drumster.
Thx

Awesome thanks!~

I believe this is it. or near to... this one is a .81


http://www.ruggedridgesales.com/Light-M ... PRD37.aspx


EN.

Here's another place;
http://www.vintagejeepparts.com/NewItems_2010_07.asp
I think it's best to specify the part # 11503.83 because they make various diameter clamps - you don't want one too big or small.
Cheers!
T

Aciled wrote:Awesome thanks!~

I believe this is it. or near to... this one is a .81


http://www.ruggedridgesales.com/Light-M ... PRD37.aspx


EN.

Just wondering if anyone has tried these. Just wondering if they will work as the biggest size is 1" 3/4. Thanks

http://cgi.ebay.ca/New-PIAA-1-3-4-Black ... 1c1730b604

Craig

CREGAN wrote:Just wondering if anyone has tried these. Just wondering if they will work as the biggest size is 1" 3/4. Thanks

http://cgi.ebay.ca/New-PIAA-1-3-4-Black ... 1c1730b604

Craig

I kind'a think not; they're a smaller diameter than the bar and being solid, they're likely crack rather than stretch.

The rugged ridge brackets work great. I installed some on my L400. I have an extra set if anyone is interested.

Sent you a pm.

Phil

CRAP. I just put my little one down for a nap and missed that. If Luckydad isn't interested, I am. Does anyone know of any other sets of mounting brackets or clamps that work well? I was kind of going more for a streamlined approach as opposed to the super rugged look, but whatever works.

Craig

My extra set of brackets is know gone. Never did get your pm luckydad??? Aciled grabbed them. He lives only 5 mins away. To cool. Thanks

Sent the pm right after I read your post. Oh well, too bad for me!

So I have taken an interest in thes brackets but I can not seem to find any. I have searched on the web and found one other place besides Vintage Jeep and have been sending emails requesting a shipping quote but no one is responding. Shipping from Vintage Jeep might get pricey as they are in Texas, but the other place (truckandwinch.com) is in California I believe. Anyone know where I can wrangle up a set of these? Not ebay as they want $50 each! Thanks

Craig

I can organize a group buy if you guys want, have it shipped to WA, pick them and ship them out from BC.

More then 10 people and I'll do it.

I am definately in! Come on people lets do it. Man I am getting addicted to group buys.

Craig

Drumster wrote:I thought I'd let you all know about this as I had such a difficult time finding these brackets. It's not because they're not available, it's just because sellers don't provide manufacturer name, part numbers etc.
So for any of you who're interested, here's all the pertinent details you need to do a search. (These are 1 - 7/8 diameter - same as L400 bull bar.)



Cheers!

Doesn't the box say 1.5"?