Search found 29 matches
- Sun Jan 15, 2017 12:19 am
- Forum: L300 Technical
- Topic: Battery Size
- Replies: 3
- Views: 3312
Battery Size
I replaced my dying/dead dual batteries in my 91' Super Exceed with a single Odyssey PC1500 DT. Group 34/78. I used the existing securement bar and hook bolt, but put a larger sized nut as a washer as the threads weren't long enough. I cut down/ modified the dual battery leads and it worked a charm....
- Sat Jan 02, 2016 6:39 pm
- Forum: L400 Technical
- Topic: Help lol
- Replies: 3
- Views: 2260
Re: Help lol
I believe it is 10mm, not sure the length of the bolt though!
- Mon Dec 14, 2015 7:06 pm
- Forum: Delica Parts for Sale (Non-Commercial)
- Topic: L300 Stainless Brake Hoses-SOLD
- Replies: 2
- Views: 3282
Re: L300 Stainless Brake Hoses
Sent you a PM
- Fri Sep 04, 2015 7:17 pm
- Forum: L300 Technical
- Topic: Lights not working
- Replies: 1
- Views: 1588
Re: Lights not working
Low and High beams are on different fuses, I'd check those first!
Right above your gas pedal, take off the cover! I believe low beams are on the 2nd row down, maybe 3rd or 4th from the left?
Right above your gas pedal, take off the cover! I believe low beams are on the 2nd row down, maybe 3rd or 4th from the left?
- Sat Aug 08, 2015 2:07 pm
- Forum: L400 Technical
- Topic: Garage near Tofino?
- Replies: 3
- Views: 2342
Re: Garage near Tofino?
Coombs Country Auto is one of the best shops in North America for Delis, they are just outside of Parksville in Coombs
http://www.ccautos.ca/
http://www.ccautos.ca/
- Sat Jul 25, 2015 10:15 pm
- Forum: L300 Technical
- Topic: Front end grinding noise
- Replies: 12
- Views: 7372
Re: Front end grinding noise
Well the new races and bearings went in without too much trouble! I used the 2x4 + hammer method to put the new races in since the freezing did next to nothing! Unfortunately I did not seem to do much for the noise, which may have gotten quieter. Since the bearings, races and seal change, the noise ...
- Fri Jul 10, 2015 1:06 pm
- Forum: L300 Technical
- Topic: Front end grinding noise
- Replies: 12
- Views: 7372
Re: Front end grinding noise
Fantastic! Thank you for your help! I've heard of people putting the new races in the freezer and then installing them, as they warm up they expand to the proper size and fit easily. I'll give that a try and report back! The wood-old-new race method seems very clever as well, good have have a few op...
- Thu Jul 09, 2015 8:28 pm
- Forum: L300 Technical
- Topic: Front end grinding noise
- Replies: 12
- Views: 7372
Re: Front end grinding noise
I am not sure if my bearings have ever been replaced, from what I understand the bearings in the L300 are supposed to be pretty bombproof, although everything wears down eventually! I replaced the calipers today as one side was definitely sticking (not seized... yet) and the noise seems greatly redu...
- Wed Jul 08, 2015 1:44 pm
- Forum: L300 Technical
- Topic: Front end grinding noise
- Replies: 12
- Views: 7372
Front end grinding noise
I've been having a rhythmic low grinding noise that seems to be coming from the front end. It increases in sound and frequency as speed increases,with little to no sound at speeds less than 10-15km/h It is much more noticeable when coasting down a hill and seems to increase while turning right. CV b...
- Sun Jun 28, 2015 8:19 pm
- Forum: L400 Technical
- Topic: Tire change
- Replies: 6
- Views: 4736
Re: Tire change
Lots of people run the 30x9.50 tires, no real difference, I believe your actual speed is around 3% faster than the speedo.
- Tue Jun 16, 2015 11:07 am
- Forum: Mitsubishi Kei
- Topic: Kei truck/van body kits
- Replies: 1
- Views: 5660
Re: Kei truck/van body kits
Now those are cool!!!
- Fri Jun 12, 2015 6:25 pm
- Forum: General Discussion
- Topic: Replacing headlight.
- Replies: 4
- Views: 3412
Re: Replacing headlight.
Have you taken the three 10mm bolts out? There are two on the side and one accessed from the front. This should let you pull the whole headlight assy out (you can let it rest on the bushbar) and either undo the wiring harness to take it out completely, or undo the circular beigey grey headlight acce...
- Fri May 29, 2015 9:37 pm
- Forum: Parts Wanted (Non-Commercial)
- Topic: Filtered WVO
- Replies: 2
- Views: 2294
Re: Filtered WVO
Perfect thanks!
Got a fill up and smelling like french fries!
Got a fill up and smelling like french fries!
- Fri May 29, 2015 9:22 pm
- Forum: WVO and Biodiesel
- Topic: Coolant not circulating to VegMax + Hotfox
- Replies: 9
- Views: 11174
Re: Coolant not circulating to VegMax + Hotfox
Well I figured out my problem with coolant circulation to the rear veggie tank... as well as the location of my missing vice grip. Yup... I had left a vice grip on a coolant line, enough coolant could get past, but not enough flow to circulate into the tank. Pretty happy it was an easy fix, felt pre...
- Fri May 29, 2015 6:05 pm
- Forum: Delica Parts for Sale (Non-Commercial)
- Topic: L300 Spare tire
- Replies: 0
- Views: 2274